Table of Contents
Advertisement
2. Hardware Setting
To set the A2410P/AE2410P, user MUST go through these steps:
1. Checking power supply:
cable into power supply
Channel 1 to 4
Channel 5 to 8
Channel 9 to 12
Channel 13 to 16
Channel 17 to 20
Channel 21 to 24
2. Checking cabling/pin assignment: There are six modules on A2410P/AE2410P, each
module (FXS400/FXO400) corresponds one RJ45 interface (refer figure 2). There are
eight pins on each RJ45 interface. A2410P/AE2410P uses the two pins of it as a pair,
connecting to two-wire telephone line,
telephone lines.
OpenVox Communication Co. Limited.
Board must be provided power, please plug the power supply
connector.(refer figure 2)
Module 1
Module 2
SMEC V1.1
Figure 2: A2410P/AE2410P Hardware Configuration
Please see figure 3 for the setting of A2410P/AE2410P.
Figure 3: A2410P/AE2410P pin assignment
Module 3
Module 4
312.0mm
Power Supply
(12V)
so each RJ45 interface can split into four
URL:
User Manual
Module 5
Module 6
6
www.openvox.cn
Advertisement
Table of Contents
