Deactivating The Memory Feature; Replacing The Battery - Ford Edge Owner's Manual

Locks and Security
2. Press the SET control on the
driver's door panel.
3. Within 5 seconds, press the 1 or 2
control on the driver's door panel to
associate with the Driver 1 or Driver
2 position.
4. Press the set button again.
5. Within 5 seconds, press a button
on the associated Integrated
Keyhead Transmitter.
6. Within 5 seconds, press the 1 or 2 control on the driver's door panel to
associate with the Driver 1 or Driver 2 position.

Deactivating the memory feature

To deactivate this feature:
1. Press the SET control on the driver's door panel.
2. Within five seconds, press any control on the Integrated Keyhead
Transmitter which you would like to deactivate and then press the SET
control on the driver's door panel again.
3. Repeat this procedure for another Integrated Keyhead Transmitter if
desired.

Replacing the battery

The Integrated Keyhead Transmitter uses one coin type three-volt
lithium battery CR2032 or equivalent.
To replace the battery:
1. Twist a thin coin in the slot of the
IKT near the key ring in order to
remove the battery cover.
117
2007 Edge (edg)
Owners Guide (post-2002-fmt)
USA (fus)