Powersteamer Not Picking Up Solution - Bissell 1692 PowerSteamer Clearview User Manual

Troubleshooting-continued

PowerSteamer not picking up solution.

Possible Causes
ReadyTools Dial may be at the
wrong setting for cleaning job.
Nozzle Window may not be
properly attached.
Tank-in-Tank lid is not
properly installed.
Tank-in-Tank is not properly seated.
Tank-in-Tank has picked up the maximum
amount of dirty water.
Poor tool position.
(Handheld attachments only.)
If you should happen to need assistance during assembly or operation, call: 1-800-237-7691
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
Saturday
Or write:
BISSELL INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It is your warranty.
18
Thank you for selecting a BISSELL product.
Please do not return this
product to the store.
8 a.m. — 9 p.m. EST
9 a.m. — 5 p.m. EST
Remedies
Set ReadyTools Dial to either FLOOR
CLEANING or TOOLS/PRETREAT.
Make sure the two tabs on the back of
the Nozzle Window are inserted
through the mating slots in the main
housing. Reinstall if necessary.
Reinstall lid; refer to The Basics
section, page 7.
Tank-in-Tank must be firmly seated to
function. Remove and reseat Tank-in Tank.
Empty tank and refill; refer to
Basics section, page 8.
Readjust angle; apply more downward
pressure.
©2002 BISSELL Inc
Grand Rapids, Michigan
All rights reserved. Printed in USA.
Part Number 310-5800
Rev 3/02
Visit our website at:
www.bissell.com
Scotchgard a trademark of 3M