LevelOne FCS-3071 User Manual page 26

2-megapixel poe dome network camera

Hide thumbs Also See for FCS-3071:

Table of Contents

Use fixed IP address

To setup static IP address, select "Use fixed IP address" and move the cursor

to the IP address blank (as indicated below) and insert the new IP address, ex.

192.168.7.123; then go to the Default gateway (explained latter) blank and

change the setting, ex. 192.168.7.254. Press "Save" to confirm the new setting.

When using static IP address to login to the IP Camera, users can access it

either through "Device Search" software (see

IP address in the URL bar and press "Enter".

IP address

This is necessary for network identification.

Subnet mask

It is used to determine if the destination is in the same subnet. The

default value is "255.255.255.0"

:Accessing

Camera") or input the

Table of Contents