Table of Contents
Advertisement
Users can directly change an IP Camera's network property, ex. from static IP
to DHCP, in the finding device list. The way to change the IP Camera's network
property is specified below:
Step 1: In the finding device list, click on the IP Camera that you would like to
change its network property. On the selected item, right click and select
"Network Setup." Meanwhile, record the IP Camera's MAC address, for
future identification.
Step 2: The "Network Setup" page will come out. Select "DHCP," and press
"Apply" button down the page.
Step 3: Click "OK" on the Note of setting change. Wait for one minute to
re-search the IP Camera.
9
Advertisement
Table of Contents
