Technical Specifications - HUSTLER Super Z Owner's Manual

Starter 12-volt (.8
KW
solenoid shift positive
engagement.
Ignition Electronic.
Charging System 12-volt,
15-amp.
Fuel Unleaded gasoline with
octane rating of 87 or higher.
Fuel Filter Replaceable,
automotive-type.
Cooling Air cooled. Fly-
wheel fan.
Governor Mechanical.
Warranty 1 year limited.
TRACTION DRIVE
SYSTEM:
Type Dual hydrostatic.
Individual pumps power two
direct-drive wheel motors.
Hydrostatic system operates
on 10W40 motor oil.
Pumps
Hustler Z - Hydrogear BDP10
Two variable displacement,
axial piston type. Each pump
powers one drive wheel
motor.
Super Z - Hydrogear BDP21
Two variable displacement,
axial piston type. Each pump
powers one drive wheel
motor.
Pump Drive V-belt drive
from engine crankshaft.
Final Drive
Hustler Z - Parker-Ross
TF024OUS080AAFW Direct
drive high-torque wheel
motors. One for each drive
wheel.
Super Z - White CE 20 Direct
drive high-torque wheel
motors. One for each drive
wheel.
Filter Replaceable spin-on
type.
Ground Speed - infinitely
variable
Hustler Z - 0-11
MPH
) forward and 0-5
KPH
8 ) reverse
KPH
Super Z -
Transport 0-15
MPH
) forward
KPH
Mowing 0-10 (0-16.09
MPH
) forward and 0-7.5
KPH
(0-12.07 ) reverse
KPH
Steering Twin lever steering
provides independent control
of each drive wheel. Speed,
forward, reverse, brake, and
turns are all controlled with
hand operated controls.
Turning Radius True zero
350157 Rev 11/02

TECHNICAL SPECIFICATIONS

ENGINE SPECIFICATIONS
Kawasaki
Horsepower 23
No. of Cylinders 2
Displacement 41.2 (675
CU IN
Compression Ratio 8.1:1
Max. Torque 39.8 @ 2400
FT LBS
), degree. Turns within its own
length. Counter-rotating,
independent drive wheels.
BRAKES:
Service Hydrostatic dynamic
braking.
Parking Automotive style
drum brakes. When steering
levers are placed in neutral
position, integral park brakes
are automatically engaged.
Mower Drive Single V-belt
drive from engine with
electric clutch. Spring tension
idler pulley for long belt life.
TIRES:
Front Two – 13 x 6.50 – 6,
rib tread.
Drive tire:
24 x 12.00 – 12, turf tread.
CAPACITIES:
Fuel System 12 US
GAL
).
L
Hydraulic Oil 1.5 US
(5.7 )
L
DIMENSIONS: Height 39
(39 ).
CM
W/60 Deck Length 75
IN
(190.5 ).
CM
Overall width with 60" deck
and discharge chute up 62
(157.48 ).
CM
Tire-to-tire width 53
IN
(134.62 ).
CM
Weight 1100 (500
LBS
W/52 Deck Length 74
IN
(188 ).
CM
Overall width with 52" deck
and discharge chute up 59
(149.86 ).
CM
Tire-to-tire width 52
IN
(132.08 ).
CM
Weight 1075 (488.6
LBS
W/72 Deck Length 79
IN
(200.6 ).
CM
Overall width with 72" deck
and discharge chute up 70.4
(0-17.7
(178.8 ).
CM
(0-
MPH
Tire-to-tire width 60
IN
).
CM
Weight 1130 (512.5
LBS
(0-24.14
SAFETY FEATURES:
Operator presence system
connected to deck and drive
MPH
clutches. Stabilizer rollers at
rear of tractor.
SEAT:
Standard: Molded-vinyl seat
with armrests. Fore and aft
adjustments.
Optional: Molded-vinyl,
suspension seat with armrests.
Kawasaki
25
2
) 41.2
CC CU IN
8.1:1
41.0
RPM FT LBS
Fore and aft adjustment
CONSTRUCTION:
Mainframe is 1.5 x 3
IN
.187 (3.8 x 7.62
IN CM CM
.47 ) rectangular steel
CM
tubing. Drive motors mounted
to .179 (.45 ) welded
IN CM
steel. Front caster wheels
mounted with roller bearings
on each wheel. Front caster
forks are .50 (1.27
IN CM
DECK LIFT: Foot-operated
deck height adjustment. Pin
for setting height, transport
position.
CONTROLS: Hand-operated
choke/throttle, ignition switch,
electric mower clutch.
Integrated parking brakes.
INDICATORS: Hour meter,
engine warning light.
CUP HOLDER: Two cup
holders molded into the left
side fuel tank.
(45.4
Accommodates nearly any
cup size.
GAL
DECKS
IN
Common Specifications
Type: Free-floating mower
IN
using three blades with center
blade to the front. Mower is
suspended at the corners.
IN
Includes 6 deck-mounted
rollers to improve flotation in
rolling and uneven terrain.
Deck Lift: Raise and lower
).
KG
deck from driver's seat with
IN simple foot-operated deck
height adjustment. Pin for
setting height, transport
position. Change cutting
IN
heights, hop curbs, and trailer
more easily.
Construction: .125 (.317
IN
) welded steel. Solid 1
CM
).
KG
.375 (2.55 x .95
IN CM CM
IN
steel bars reinforce impact
areas on trim edges. .187
.375 (.47 x .95
IN CM CM
box-section reinforced front
IN
edge. Reinforcements welded
onto spindle mount areas.
(152.4
Steel deck housing is 5
(1.27 ) deep to provide
CM
).
KG
room for high-capacity
mowing.
Cutting Heights:
Foot-operated deck height
adjustment. Pin for setting
height, transport position.
Height adjustment in .25
increments from 1 to 5
IN
(2.55 to 12.7 )
CM CM
Blade Drive V-belt drive to
all three spindles. Spring
tension idler pulleys.
9-1
(675 )
CC
@ 2400
RPM
Spindles Machine ductile
housing. 1 (2.5 )
IN CM
diameter high carbon steel
x
IN
shafts and sealed ball
x
bearings.
Flotation Suspended mower
floats on four spring-assisted
chains. 6 anti-scalp wheels
are standard.
)
60" Side Discharge Deck
Specifications
Mowing Blades Heavy-duty,
heat-treated, high-lift steel
blades.
21 x 2.75 x .25
IN IN IN
(60Z deck with blade saddles)
21 x 3.00 x .25
IN IN IN
(60Z deck without blade
saddles)
Blade Tip Speed
18,375
FPM
52" Side Discharge Deck
Mowing Blades Heavy-duty,
heat-treated, high-lift steel
blades.
18 x 3.00 x .25
IN IN IN
Blade Tip Speed
18,900
FPM
72" Side Discharge Deck
Mowing Blades Heavy-duty,
heat-treated, high-lift steel
blades.
24 x 3.00 x .25
IN IN IN
Blade Tip Speed
18,525
FPM
ACCESSORIES
Mulch Kit Recycles
IN X
clippings under deck allowing
)
clippings to be cut and recut,
then discharged down into the
x
IN
grass. Reduces handling of
) in
clippings, improves
appearance, and recycles
nutrients back into the soil.
IN
TM
BAC-VAC Catcher Rear-
mounted, 9-bushel hopper is
dumped from the seat without
leaving the machine. Blower
is powered from right-side
deck spindle. Hopper and
blower can be added or
removed in seconds.
IN
IN