Bluetooth; Recognition) - Chevrolet Equinox Owner's Manual

7-42 Infotainment System
Conference Calling
Conference calling and three way
calling must be supported on the
Bluetooth phone and enabled by the
wireless service carrier to work.
To start a conference while in a
current call:
1. Turn or press the MENU/
SEL knob.
2. Select Enter Number.
3. Enter the character sequence
then select Call. See Entering a
Character Sequence in
information.
4. After the call has been placed,
turn or press the MENU/SEL
knob and choose Merge Calls.
5. To add more callers to the
conference call, repeat Steps 1
through 4. The number of callers
that can be added is limited by
your wireless service carrier.
Ending a Call
Turn or press the MENU/SEL knob
and select Hang Up.
Muting a Call
To Mute a Call
Turn or press the MENU/SEL knob
and select Mute Call.
To Cancel Mute
Turn or press the MENU/SEL knob
and select Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
for more
The in vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu driven
phone system.
1. Turn or press the MENU/SEL
knob and select Enter Number.
2. Enter the character sequence.
See Entering a Character
Sequence in
for more information.
Bluetooth (Voice

Recognition)

Using Voice Recognition
To use voice recognition, press the
/ button located on the steering
wheel. Use the commands below for
the various voice features. For
additional information, say Help
while you are in a voice
recognition menu.
Pairing
A Bluetooth enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls will be
made using OnStar Hands Free
Calling, if available. See
information.
for more