Engine Oil Additives/Engine Oil Flushes; Selecting The Right Engine Oil - Chevrolet Malibu 2012 Owner's Manual

10-10 Vehicle Care

Selecting the Right Engine Oil

Selecting the right engine oil
depends on both the proper oil
specification and viscosity grade.
See
Specification
Use and ask for licensed engine
oils with the dexos1 approved
certification mark. Engine oils
meeting the requirements for the
vehicle should have the dexos1
approved certification mark. This
certification mark indicates that the
oil has been approved to the dexos1
specification.
Failure to use the
recommended engine oil or
equivalent can result in engine
damage not covered by the
vehicle warranty. Check with
your dealer or service provider
on whether the oil is approved to
the dexos1 specification.
.
Viscosity Grade
SAE 5W 30 is the best viscosity
grade for the vehicle. Do not use
other viscosity grade oils such as
SAE 10W 30, 10W 40, or 20W 50.
If in an area of extreme cold, where
the temperature falls below 20°F
( 29°C), an SAE 0W 30 oil should
be used. An oil of this viscosity
grade will provide easier cold
starting for the engine at extremely
low temperatures. When selecting
an oil of the appropriate viscosity
grade, always select an oil that
meets the dexos1 specification or
equivalent. See Specification for
more information.
Engine Oil Additives/Engine
Oil Flushes
Do not add anything to the oil. The
recommended oils with the dexos
specification and displaying the
dexos certification mark are all that
is needed for good performance and
engine protection.
Engine oil system flushes are not
recommended and could cause
engine damage not covered by the
vehicle warranty.
What to Do with Used Oil
Used engine oil contains certain
elements that can be unhealthy for
your skin and could even cause
cancer. Do not let used oil stay on
your skin for very long. Clean your
skin and nails with soap and water,
or a good hand cleaner. Wash or
properly dispose of clothing or rags
containing used engine oil. See the
manufacturer's warnings about the
use and disposal of oil products.