Table of Contents
Advertisement
3. HARDWARE SETUP
22) IDE Activity LED (2-pin IDELED)
This connector supplies power to the cabinet's IDE activity LED. Read and
write activity by devices connected to the Primary/Secondary IDE and Primary/
Secondary ATA100 connectors will cause the LED to light up.
1
0
1
0
1
0
A7V
A7V IDE Activity LED
NOTE: The LED will not light up during read and write activity by devices
connected to the Primary or Secondary IDE connectors of motherboards with
PCB versions earlier than Rev. 1.01.P (for example, Rev. 1.01.). To check your
PCB version, see the area between PCI4 and PCI5 and look for the marking that
starts with "REV."
AMR
The following PANEL illustration is used for items 23–28 (next page).
1
0
1
0
A7V
A7V System Panel Connectors
TIP: If the case-mounted LED does not
light, try reversing the 2-pin plug.
IDELED
PCI4
PCI5
1
0
ASUS A7V User's Manual
Speaker
Connector
Power LED
Reset SW
Message LED
ATX Power
SMI Lead
Switch*
Requires an ATX power supply.
*
43
Advertisement
Table of Contents
