4.5.1 Apm Configuration - Asus P5BV-M User Manual

4.5.1 APM Configuration

APM Configuration
Restore on AC Power Loss
Resume On Ring
Resume On PME#
Resume On RTC Alarm
Restore.on.AC.Power.Loss.[Last.State]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume.On.Ring.[Disabled]
When set to [Enabled], the system enables the RI to generate a wake event while
the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume.On.PME#.[Disabled]
Allows you to enable or disable the Resume On PME# function.
Configuration options: [Disabled] [Enabled]
Resume.On.RTC.Alarm.[Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to [Enabled], the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]
4-24
Power
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
[Last State]
[Disabled]
[Disabled]
[Disabled]
<Enter> to select
whether or not to
restart the system
after AC power loss.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 4: BIOS setup