Asus CUC2000-M User Manual page 18

3. HARDWARE SETUP
Motherboard Feature Settings
The motherboard's onboard functions are either adjusted through jumpers or DIP
switches. When using DIP switches, the white block represents the switch's posi-
tion. The example below shows all the switches in the OFF position.
CUC2000-M
CUC2000-M DIP Switches
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
NOTE: In JumperFree™ mode, all dip switches (SW1) must be set to OFF.
Setting
Enable (JumperFree) [2-3] (default)
Disable (Jumper)
CUC2000-M
CUC2000-M JumperFree™ Mode Setting
18
OFF
SW1
JEN
[1-2]
ASUS CUC2000-M User's Manual
ON
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection.
SW1
OFF
JEN
1
1
Jumper JumperFree
(Default)