File Sharing - Ovislink AirLive WMU-6500FS User Manual

system, you are recommended to do this by pressing "Check" button.
Create a new partition
You could also format your hard disk to one partition by FDISK Utility. If you press "Format" button, then the AirLive
WMU-6500FS will make only one partition with total capacity of internal hard disk, and format that partition.
WARNING:
All data in the hard disk will be ERASED after pressing format button. The
hard disk is formatted to Ext2 file system. It can not be connected directly to
a Microsoft Windows system without reformatting to other file system that
Windows system can recognize.

4.2 File Sharing

In the configuration of File Sharing, you can see the following items:
Computer Name: Host name is the identification of AirLive WMU-6500FS when you browse it in Microsoft My
Network Places.
WorkGroup: Indicate a workgroup name of Microsoft Network Places.
Server Comment: The comment will be showed when you browse it in Microsoft My Network Places.
Language: Select which language will be used for folder/file name in the hard disk. Incorrect language setting may
cause folder/file name unreadable.
FTP Configuration: The FTP server is enabled by default, so you can also access AirLive WMU-6500FS by any FTP
client utility. Besides, you can also set the maximum concurrent connections of FTP service. The maximum concurrent
connections of FTP are limited to 20.
AirLive WMU-6500FS User's Manual
43