Wireless Setting - Ovislink AirLive WMU-6500FS User Manual

General Settings: default machine IP is 192.168.123.254. This IP address must be unique on your network.
You can change it if necessary. This setting is only used for DHCP server mode, and Static IP mode. Host
name is the identification of AirLive WMU-6500FS when you browse it in Microsoft My Network Places.
DCHP Mode: The default mode is "Auto"
Client: If you have a DHCP server on the network, set this option to receive an automatic IP address
and subnet mask assignment.
Server: The AirLive WMU-6500FS will become a DHCP server on the network.
Auto: Select this option to let AirLive WMU-6500FS send out a DCHP request during boot up. If you
have another DHCP server on the network, the AirLive WMU-6500FS will receive an automatic IP
address and subnet mask assignment. If there is no DHCP server on the network, the AirLive
WMU-6500FS will become a DHCP server on the network.
Static: You can manually configure the IP address and subnet mask of AirLive WMU-6500FS.
Server Settings: (This information would be used when you choose Server mode or Static mode.)
Subnet Mask: subnet mask of your network.
IP Pool: decide the IP address range that DHCP server will offer.
Primary DNS / Secondary DNS: This feature allows you to assign DNS Servers. You could get this
information from your ISP.
Gateway: The gateway IP address would be the IP address of an alternate gateway. If you do not
know how to setup the gateway, please contact your network administrator or ISP.
Client List: When AirLive WMU-6500FS is as a DHCP server, here will show some information of
DHCP client.
Fixed Mapping: DHCP server can assign the same IP address to a certain "MAC address".

3.2.2 Wireless Setting

Select the Wireless option in the Network Settings page.
28
AirLive WMU-6500FS User's Manual