Wps Configuration - Ovislink AirLive WN-360USB User Manual

2.7 WPS Configuration

Wi-Fi Protected Setup (WPS) is the latest wireless network technology which makes wireless
network setup become very simple. If you have WPS-enabled wireless access point, and you want to
establish a secure connection to it, you don't have to configure the wireless access point and setup
data encryption by yourself. All you have to do is to go to the WPS setup page of this wireless card,
click a button, and then press a specific button or enter a set of 8-digit code on the wireless access
point you wish to establish a secure connection - just three simple steps!
For older wireless access points, it's possible to perform a firmware upgrade to become a
WPS-enabled access point. Since they may not have a hardware button to press for WPS setup, you
can use an alternative WPS setup method - input the pin code. Every WPS-compatible wireless
network card support pin code configuration method; you can just input the code to wireless access
point, and the wireless access point and wireless network card will do the rest for you.
This wireless network card is compatible with WPS. To use this function, the wireless access point
you wish to connect to must support WPS function too. Now, please follow the following instructions
to establish secure connection between WPS-enabled wireless access point and your wireless
network card.
43 WN-360USB User's Manual