Indicator Lights; Dip Switches; Checking Dip Switches - Pentax PocketJetII User Manual

Indicator Lights

The three indicator lights—POWER, DATA, and BATTERY— show
both normal operation and error conditions.
• Red POWER light is steady: Power is on.
• Red POWER light is blinking: An error has occurred.
• Green DATA light is steady: Unprinted data is in the printer buffer or
a command has been received from the computer.
• Green DATA light is blinking: Printer is receiving data.
• Green BATTERY light is steady: The battery charge is high or the
battery is being discharged.
• Green BATTERY light is blinking: The battery charge is low or the
battery is being charged.
Chapter 5, "Reference," contains a table with all combinations of
indicator lights and their meanings.

DIP Switches

Four DIP switches control how the printer works. Follow these steps to
make sure the switches are set correctly.

Checking DIP Switches

1. Set the printer face down so that the battery compartment is towards
you.
2. Find the set of four DIP switches marked SW1 on the bottom of the
printer. See Figure 5.
FIGURE 5. Checking the printer's DIP switches
3. Check the settings of the DIP switches.
NOTE: At the factory all DIP switches are set to ON (up). For a
table listing the function of each DIP switch, see next
page.
Page 5