Connecting To An Ac Outlet - Pentax PocketJetII User Manual

Connecting to an AC Outlet

Connect the printer to a nearby AC power outlet to run it on AC power
or to charge the battery (see Charging the Battery).
1. Connect the AC adapter to the printer as shown in Figure 2.
2. Connect the AC power cord to the AC adapter.
3. Plug the AC power cord into a nearby AC power outlet.
FIGURE 2. Connecting the printer to an AC power outlet
The PocketJet works from DC sources from 11.8 to 14.4V. If the
voltage drops below 11.8, the print quality will begin to degrade.
NOTE: The plug on the AC power cord shown in Figure 2 is
compatible with AC power outlets in the U.S.A., Canada,
and some Central and South American countries. Use a
plug adapter if necessary or contact your local reseller or
Pentax for further assistance.
Page 2