j5 create USB VGA/DVI Display Adapter User Manual page 34

A. Connect all external display devices (monitor/ projector) to the
VGA/DVI connector of USB Display Adapters and switch power on.
B. Connect the USB Display Adapter into available USB 2.0 port of PC or
Notebook.
After Inserting an USB Display Adapter into a USB 2.0 port, the systems will
automatically start the installation procedure and the prompt message
will pop-up on the task bar.
The Device driver software was installed properly, if you are going to install
more USB Display Adapters, repeat step A & B or restart computer
The functions of the USB Display Adapter will be activated after the computer
restarted. You might see the mirror display shown on the display device.
34