j5 create USB VGA/DVI Display Adapter User Manual page 12

4. When Install Shield Wizard is complete, select "Yes, I want to restart my
computer now." Click Finish to restart.
5. After your computer is rebooted, connect the external display device
(monitor/ projector) to the VGA/DVI connector of the USB Display Adapter
and turn on the display device.
6. Connect the USB Display Adapter into an available USB 2.0 port of a PC or
Notebook, After Inserting the USB Display Adapter into an USB 2.0 port, the
"Installing device driver software" message will pop up.
If the Driver software was installed successfully the following message
should appear:
12