Asus CUV4X-D User Manual page 36

3. HARDWARE SETUP
10) Power Supply Connectors (20-pin block ATXPWR, 6-pin EAUXPWR)
These connectors connect to an ATX 12V power supply. The plugs from the power
supply fits in only one orientation because of the different hole sizes. Find the
proper orientation and push down firmly making sure that the pins are aligned.
IMPORTANT:
recommended wattage: 230W) can supply at least 10mA on the +5-volt standby
lead (+5VSB). The system may become unstable and may experience difficulty
powering up if the power supply is inadequate. For Wake-On-LAN support, the
ATX power supply must supply at least 720mA +5VSB.
CUV4X-D
®
CUV4X-D ATX Power Connector
36
Make sure that the ATX 12V power supply (minimum
ASUS CUV4X-D User's Manual
Pin 1
AUXPWR