Asus CUV4X-D User Manual page 33

3. HARDWARE SETUP
4) Wake-On-LAN Connector (3-pin WOL_CON)
This connector connects to a LAN card with a Wake-On-LAN output, such as
the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up
the system when a wakeup packet or signal is received through the LAN card.
IMPORTANT: This feature requires that the Wake-On-LAN field is enabled
(see 4.5.1 Power Up Control) and that the system has an ATX power supply
with at least 720mA +5V standby power.
CUV4X-D
®
CUV4X-D Wake-On-LAN Connector
5) Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card. NOTE: For external modems, Wake-On-Ring
is detected through the COM port.
CUV4X-D
®
CUV4X-D Wake-On-Ring Connector
ASUS CUV4X-D User's Manual
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power.
WOL_CON
+5 Volt Standby PME
Ground
WOR
1 2
Ground RI#
33