Edit Knobs A, B, C; Store; System; Bypass - Lexicon MX500 Owner's Manual

The Front Panel
MX500

8. Edit Knobs A, B, C

These knobs modify the associated parameters shown in the Main Display when editing
programs or changing the settings in the System Menu.

9. Store

Used to store or copy programs to the same or different user memory locations.

10. System

Accesses the global System setup menus.

11. Bypass

Pressing this button bypasses or mutes the currently selected program.

12. User and Factory LEDs

Indicate whether the selected program is User or Factory.

13. Program Number Display

Displays the number of the selected program.

14. Program / Load

Selects factory and user programs. Pressing this knob loads the program manually if
program Auto Load is disabled. When in the Program Screen, press this knob to switch
between factory and user program banks. This eliminates the need to scroll through 99
presets if you're in the middle of the user presets and you want to go to a preset in the
middle of the factory presets.

15. Power Switch

Turns the MX500 on and off.
5