Home Screen - DSPeaker Anti-Mode 2.0 Owner's Manual

3.Home Screen

The default home screen view consists of three components. The currently active input
is displayed at the center.
➢The active input can be switched by pressing the INPUT button on the remote.
Similarly, the active output is shown at the bottom of the screen.
➢Press the OUTPUT (green-coded) button to switch between the digital and analog
output modes.
Various state information is shown at the top of the home screen. The icons are from
left to right:
(1)Input sample rate (in kHz)
(2)Input bit depth
(3)House curve indicator
(4)Tilt curve indicator
(5)Lowpass or highpass indicator
(6)Custom EQ indicator
(7)Infrasonic filter indicator
(8)Speaker configuration indicator. A yellow triangle in this position means that Anti-
Mode room correction is NOT active.
➢Press the BYPASS (orange-coded) button on the remote to toggle the room
correction on and off.
(9)Displays the currently active sound profile (designations "A" to "D"). Press the
corresponding button on the remote to select a new active sound profile. See the
"Using Sound Profiles" section for further information.
➢Press the DISPLAY button (blue) on the remote to toggle screen dimming. The dimmed
mode is less obtrusive with much less information on display.
Rev. 0.93 2012-06-08
A -M 2.0 D
NTI ODE
O
WNER
Page 10 (28)
C
UAL ORE
' M
S ANUAL