Custom Installation; External Ir (Infrared Remote) Installation; Rs232 Control - Oppo BDP-95 User Manual

Blu-ray disc player

Hide thumbs Also See for BDP-95:

Table of Contents

I N S T A L L A T I O N

Custom Installation

The OPPO BDP-95 Blu-Ray Disc Player features an IR IN port on its back panel. If the player is to be

installed in an equipment cabinet where direct line-of-sight is not available for remote control, your custom

home theater installer can purchase an external IR Remote Sensor and plug it into the IR IN port. Place the

sensor head at a location where there is direct line-of-sight to ensure reliable operation.

Rear Panel

NOTE

When an external IR sensor is plugged in, the original IR sensor window on the front

panel will be disabled.

OPPO cannot guarantee that the IR IN port will be compatible with devices that are

not manufactured by OPPO. Connecting the IR IN port to an incompatible device may

result in damage to the connected device or the player.

The IR port on the BDP-95 is NOT compatible with the prior external IR Remote

Sensor (IR-ES1) which is used with BDP-83.

Please contact OPPO customer support if you plan to integrate the player into an IR

distribution system. Customer support can provide recommendations on how to

properly connect the control signals.

The BDP-95 has an RS232 control port and can be integrated into most custom home theater control

systems. Please ask your custom installer to contact OPPO for the RS232 control protocol.

3.5mm Mono Cable

External IR Remote Sensor

IR IN Signal Identifications

3.5mm Mono Plug

Tip: IR carrier signal

Sleeve: Ground

Table of Contents

Show Quick Links

Table of Contents