JUKI MF-7500 Series Specifications page 5

E11
For elastic lace attaching
(with right hand fabric trimmer)
MF-7523D-E11-B56/MD11/TC16
List of subclass machines
Application Seam
MF-7500-E11
Elastic lace
attaching
MF-7500D-E11
Elastic lace
attaching
*1 Stitch length can be adjusted to 4.4mm at the maximum.
*2 The lift of the presser foot is 5mm for the top and bottom coverstitch machine, and 8mm for the bottom coverstitch machine
Device
TC16
Electromagnetic type tape cutter
It is a device for cutting the tape or lace at the beginning or end of sewing. It is easily
actuated to cut tape with the knee switch.
The knife is able to cut lace and tape up to 40mm wide.
The sharpness of the knife can be easily adjusted. In addition, replacement of the
moving knife and counter knife, as well as the adjustment of their mesh, can be carried
out with ease.
MD11
Mechanical type metering device
The metering device supplies a consistent length of tape in synchronization with the
feed. (tape lengths: 0.9 to 3.5mm per stitch.)
Elastic tapes of up to 80mm in width can be used. The tape width can be easily
adjusted. For lace of which the width is 15 to 80mm, change the currently-mounted
guide with the wider-tape guide that is supplied with the unit as an accessory.
The drive roller/driven roller can be held open to facilitate tape placement.
This model is best suited for the sewing of elastic lace in shorts and underwear.
The right hand fabric trimmer cuts the multi-layered part of a joined section with outstanding
consistency. Beautifully finished products are achieved with the seams and material edges aligned.
The right hand fabric trimmer mechanism's easy installation / removal of the entire unit facilitates
the adjustment of related parts, such as the alignment of a looper.
The machine can also be used for collarette-attaching processes by removing the knife unit. (Replacement of the gauge and cover is required.)
Model No.
MF-7522-E11-B
MF-7522-E11-B40/MD11
MF-7522-E11-B40/MD11/TC16
MF-7523-E11-B
MF-7523-E11-B /MD11
MF-7523-E11-B /MD11/TC16
MF-7522D-E11-B40/MD11
MF-7523D-E11-B56
MF-7523D-E11-B /MD11
MF-7523D-E11-B56/MD11/TC16
Number Number Needle
of of gauge
needles threads (mm)
3.2,4.0
2 4
4.0
3 5 5.6,6.4
2 4 4.0
5.6
3 5 5.6,6.4
5.6
TC16
Adjustment of the tape feeding amount
Ladies'
inner wear
Stitch Presser foot
length * 1 Differentialfeed lifting amount *
(mm) ratio (mm)
1:0.9,1:1.8
0.9~3.6 5 (8)
(1:0.6,1:1.1)
1:0.9,1:1.8
0.9~3.6 5 (8)
(1:0.6,1:1.1)
Shorts
Max. sewing
2 speed
(sti/min)
6,500
5,000
6,500
5,000
5,000