Automatic.bluetooth.connection - Xlink ITC-BT Owner's Manual

HINT:
•..Each.line.can.only.be.paired.to.ONE.cell.phone.at.a.time.
•..(as.soon.as.pairing.is.started.for.a.line).Previous.pairing..
information.is.lost.
•. A.line.can.be.paired.to.a.different.cell.phone.at.any.time.by.repeating.the.
pairing.procedure.
•. A.paired.line.can.be."unpaired".and.prepared.for.re-pairing.by.holding.
down.the.line.button.until.the.button.flashes.rapidly.
•. The.pairing.process.can.be.aborted.at.any.time.by.pressing.the.line.button..
The.previous.paired.cell.phone.will.be.disconnected.
auTomaTIC Blue TooTh ConneC TIon
Once.a.line.is.paired.to.a.cell.phone.it.will.automatically.try.to.connect..When.the.cell.
phone.goes.out.of.range,.the.line.light.will.flash.slowly.to.indicate.it.is.not.connected.and.
is.searching.for.the.cell.phone..When.the.cell.phone.comes.into.range.of.the.XLink.it.will.
automatically.connect.to.the.XLink.and.the.line.light.will.turn.solid.blue.to.indicate.the.
connection.
If.you.are.on.a.call.and.walk.into.range,.the.XLink.ITC-BT.and.cell.phone.will.
automatically.connect.and.route.the.call.to.an.extension.set..Simply.pick.up.an.
extension.set.to.continue.the.call..If.the.call.is.not.automatically.connected.see.section.
Force.Call.Connection.
If.a.line.light.is.not.flashing.and.you.wish.to.place.the.line.into.automatic.connection.mode,.
simply.press.the.line.button.once.
7