Adding Via Points To The Current Route; Adding A Via Point - Pioneer AVIC-8DVD Operation Manual

Adding Via Points to the Current Route

You can select via points (locations you want to visit on the way to your destination) and you
can recalculate the route to pass this location.
sAdding a via point
You can set up to five via points. This is achieved as follows :
1 Specify the location you want to visit.
You specify a via point in the same way as you specifying a destination (see Chapter 3).
You can also scroll the map to display the Shortcut menu (
), and use the location cross pointer to set a via point.
27
When the location is found, a message appears asking whether you want to set this loca-
tion as your destination, or as a via point.
2 Select "Via point" and click the OK button.
A list giving your currently set destination and its via points appears.
3 Confirm the contents of the list, and select "Done". Click the OK button.
Route calculation with the specified location as a via point starts if you click the OK but-
ton.
On this display, you can select the following items:
Add : You can add more via points. Repeat the procedure from Step 2 above (you can
add up to five via points).
➲
If you select "Map Search", you can specify the location to register by showing a map.
Delete : You can delete via points from the list.
Sort : You can sort your destination and via points in the order of the nearest (distance
in a straight line) from the current location.
see "Shortcut menu" on page
59