Advertisement
Quick Links
WorkForce
K101
®
Start Here
Read these instructions before using your product.
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on your printer
1
Connect the power cable to the back of the printer and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Press the
power button to turn on the printer.
3
Install ink cartridges
Caution:
Keep ink cartridges out of the reach of children and don't
drink the ink.
Note:
The ink cartridges that come with your printer have a lower
yield due to the ink system charging process. This process is carried
out the first time you turn on your printer and guarantees better
performance.
1
Open the printer cover.
2
Open the cartridge cover.
3
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
4
Remove only the yellow tape from each cartridge.
Caution:
Don't remove any other seals or the cartridges may
leak.
5
Insert the cartridges in the ink cartridge holders. Press
each cartridge down until it clicks.
6
Close the cartridge cover. Press down until it clicks.
Advertisement
Related Manuals for Epson WorkForce K101
Summary of Contents for Epson WorkForce K101
-
Page 1: Install Ink Cartridges
WorkForce K101 ® Install ink cartridges Start Here Caution: Keep ink cartridges out of the reach of children and don’t drink the ink. Read these instructions before using your product. Note: The ink cartridges that come with your printer have a lower yield due to the ink system charging process. -
Page 2: Load Paper
Close the printer cover. Slide the edge guides against the paper, but not too tight. Make sure the paper is under the tabs on the edge Press the ink button to prime the ink delivery system. guides. Ink priming takes 4 ½ minutes. Letter Caution: Don’t turn off the printer while it is priming or you’ll... -
Page 3: Install Software
If your computer does not have a CD/DVD drive, you can using an Ethernet cable or directly to your computer using ® download the software from the Epson website, as described under a USB cable. See below for details on each connection “Epson Technical Support”. method. - Page 4 Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.
Need help?
Do you have a question about the WorkForce K101 and is the answer not in the manual?
Questions and answers