Oz completo GB
19-05-1999 15:55
Pagina 30
Service
Technical
service
OZ
If you notice that
is malfunctioning, check that:
• the plug is properly inserted in the power socket;
• there is not a mains power cut;
• the thermostat knob is turned to a setting higher than '1'.
If the fault persists, contact your local Zanussi Service Force
Centre by telephoning 0870 5 929929.
Your call will be automatically routed to the Service Centre covering
your post code area.
The manufacturer accepts no responsibility for any
printing or transcription errors in this booklet and
reserves the right to make any modifications that are
felt to be necessary or useful, also to improve opera-
tion, without altering fundamental operational and
safety characteristics.
In order to ensure prompt service, always remember to specify the
OZ
following when calling: type of fault found with
; Model num-
ber (Mod.); Product number (Prod. No.); Serial number (Ser. No.).
This information can be found on the guarantee certificate or on
the rating plate on the inside of the door, at the bottom.
30