Reverse Side
Port
HDMI IN
SERVICE (5V 0.5A)
EXTERNAL IR / AMBIENT SENSOR IN
RGB IN
AUDIO OUT
RGB / HDMI AUDIO IN
RS232C IN
RS232C OUT
PIM
Description
Connects to a source device using an HDMI cable.
This port is used to upgrade the software.
Supplies power to the external sensor board or receives the light sensor signal.
Connects to a source device using a D-SUB cable.
Connects to the audio of a source device.
Receives sound from a PC via an audio cable.
Connects to MDC using an RS232C-stereo adapter.
Connects to a PIM. (Refer to the PIM user manual for details.)
16