Advertisement
10
CONTAINER INSTALLATION
1.
Install containers on support frame, overlapping
containers at center tube.
Note: One container should always overlap the
other container at the center tube.
2.
Close cover and lock latch handle over support
tubes.
ASSEMBLY
11
1.
2.
Latch Handle
Support Frame
CHUTE/HOOD INSTALLATION
Latch upper chute to middle chute.
Insert upper chute into gasketed opening on the
hood assembly.
WARNING!
DO NOT operate mower unless
containers are properly installed.
Containers are subject to wear and
deterioration. Check containers
frequently, replace when cracked or
damaged. Use only a recommended
replacement containers.
9
Advertisement
