Life Timer; Lights; Listen To Voice Messages; Lock Code - Nokia 6185 Owner's Manual

Letter case
You can change from upper to lower case when entering
letters into your phone.
See "abc mode (Changing letter case)" on page 36 for more details.

Life timer

The life timer displays the approximate total time of all
calls dialed and received with your phone (in hours and
minutes only). The life timer can not be reset and is used
in conjunction with your phone' s warranty.
Press Menu 2-5-3 (Call log - Call timers - Life timer) to
view your phone' s life timer.
Note: The actual time invoiced for calls by your service provider
may vary, depending upon items such as network features,
rounding off for billing, and taxes.
Also, see "Call timers" on page 25.

Lights

This is one of the settings in your phone' s Car profile (
). This feature determines whether the lights are
page 55
on only when you use your phone, or if they are on at all
times. This setting works only when your phone is
connected to a car kit.
Press Menu 3 (Profiles)
1.
Your phone lists each profile. Use
2.
profile you want and press Options.
Car
Note: will not appear in the list until the phone has been
connected to a car kit at least one time.
Highlight Customize and press OK. Press
3.
highlight Lights and press Select.
to scroll through your choices and press OK
Use
4.
t
If you select Automatic, your phone' s lights are turned
off within fifteen seconds if no keys are pressed. If On is
selected, then the lights will remain on the entire time
your phone is connected to the car kit.
42
see
to highlight the
t
to
t

Listen to voice messages

This feature allows you to access your voice messages.
See "Voice messages" on page 73 for complete details.

Lock code

You' ll need the lock code to activate and deactivate
Phone Lock ( ), or to change your lock code. The
see page 53
default lock code is 1234. If you enter an incorrect lock
code five times in a row, phone will prompt you for
your
the security code ( ).
see page 62
Changing your lock code
In a lock code, only numeric characters are accepted.
Enter Menu 4-3-2-3 (Settings - Security settings -
1.
Access codes - Change lock code)
Enter lock code at Enter lock code: and press OK
2.
Enter new lock code, press OK
3.
Verify new lock code, press OK
4.
Note: When you change your lock code, make sure you store it in a
safe place, away from your phone. Avoid entering access codes
similar to emergency numbers to prevent accidental emergency
calls.

Manual touch tones

This setting determines how long touch tones are
produced as you press the keys on the keypad. Note that
touch tones are sometimes called DTMF tones.
See "Touch tone length" on page 70 for details.
Setting manual touch tones
Press Menu 4-2-3-1 (Settings - Phone settings - Touch
tones - Manual touch tones) and highlight one of the
following options, then press OK.
Continuous means the tone sounds for as long as
you press and hold the key.
43