Permissible Water Pressure; (To Ensure Reliable Function); Installation; Unpacking - Electrolux ERES3500 Instruction Booklet

Electrolux refrigerator
Hide thumbs Also See for ERES3500:
Table of Contents

Advertisement

Permissible water pressure

ensure reliable function)
The total flow in the system can vary, depending on
local water conditions and/or water pressure.
Lowest permissible water
pressure. 2,5 bar (250kPa)
Highest permissible water
pressure. 5 bar (500kPa)
Do not connect the refrigerator in spaces
where ambient temperature can decrease to
below freezing.
The refrigerator may only be connected to
drinking water supplies.
The refrigerator may only be connected to
cold water supplies.

Installation

Unpacking

Unpack the cabinet and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling. For more information,
contact your local city office or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.

Remove the transport supports

Remove the tape and the transport supports from
the door sides
·
inside the door hinges
·
the shelves
·
Remove the transport support on the glass shelf by
pushing the support forward along the edge of the
shelf until it stops. Take hold of the rear edge of the
glass shelf and pull the shelf and transport support
forward until the shelf tilts and the transport support
can be removed. Some models are fitted with a
silencing pad under the cabinet. Do not remove this
pad.

Cleaning

Wash the inside of the cabinet using lukewarm
water, a mild washing-up detergent and a soft cloth.
(to
.
Consult your installer if water
pressure is less than 2,5 bar.
If water pressure exceeds 5
bar, than a reduction valve
must be fitted (available from
your specialist shop).
13
GB
Electrolux 8183821-00/1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eres3500x

Table of Contents