Tape Length Setting - JVC GR-AX680 Instructions Manual

10
EN
Viewfinder
MENU
4
MENU END
FOCUS AUTO
EXPOSURE AUTO
DATE TIME 25. 12. 98
TELE MACRO OFF
TAPE LENGTH T60
M. W. B. AUTO
ZOOM SPEED FAST
4
NEXT
TAPE LENGTH
T30
T45
T60
EXIT
MENU
4
MENU END
FOCUS AUTO
EXPOSURE AUTO
DATE TIME 25. 12. 98
TELE MACRO OFF
TAPE LENGTH T30
M. W. B. AUTO
ZOOM SPEED FAST
4
NEXT
SP/LP Recording
Mode Button
Select Dial
SP
Menu Screen
TAPE LENGTH
Setting Menu
MENU Jog Dial
Tape length
T30
indicator
Recording
mode
indicator
GETTING STARTED

Tape Length Setting

Set the tape length according to the length of the tape
used.
ACCESS MENU SCREEN
1
First set the Power Switch to "CAMERA". Turn the
Select Dial to any position except AUTO LOCK,
then press the MENU Jog Dial.
SELECT FUNCTION
2
Rotate the MENU Jog Dial to move the highlight bar
to "TAPE LENGTH", then press it. The TAPE
LENGTH Setting Menu appears.
SET TAPE LENGTH
3
Rotate the MENU Jog Dial to move the highlight bar
to the correct setting. T30=30 minutes of recording
time, T45=45 minutes, and T60=60 minutes (in SP).
•If you decide you want to return the tape length to
the previous setting, rotate the MENU Jog Dial to
move the highlight bar to "EXIT".
CLOSE MENU
4
Press the MENU Jog Dial. The Menu Screen
reappears and the highlight bar is on "MENU END".
Then press the MENU Jog Dial again to close the
Menu Screen.
NOTES:
The tape remaining time (
the correct tape length has been selected.
Once you have set the tape length, it remains un-
changed even if the Select Dial is returned to AUTO
LOCK.
Recording Mode Setting
Set depending on your preference.
SET RECORDING MODE
1
First set the Power Switch to "CAMERA". Press SP/LP
Button for more than 1 second. "SP" (Standard Play)
provides higher picture and sound quality and is
better for dubbing, while "LP" (Long Play) is more
economical, providing twice the recording time.
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
(cont.)
pg. 15) is correct only if