Powering The Pdp Tv; Initial Settings - DAYTEK PLASMA DISPLAY User Manual

Powering the PDP TV

°‹
Power on/ off
°§
To turn the PDP TV on :
Press the "Main Power" button of PDP TV and then press the "Standby" button.
°§To turn the PDP TV off :
Press "Standby" button on the PDP TV and then press the "Main Power" button.
Turning the main power switch off will save energy. It is the same as unplugging the power cord.
If ON Time setting is set, the main power should be ON.
°§To turn on/off by remote controller :
Press the "POWER" button of remote controller (If the PDP TV is not turned on, check that the "Main Power"
button on the PDP TV main body is turned on. The main power indicator will light up red if turned on).
CAUTION -
After turning off the main Power, please wait at least more than 3 seconds to turn the main power back on.

Initial Settings

°§
When the brand new television set it turned on for the first time, following settings can be set using the plug
and play function of the TV.
Using the menu
°‹
Press the "Main Power" button of PDP TV and then press the "Standby" button.
You will see the Tuner Mode selection menu.
Use
Press
Use
Press
Press
2 0
Basic Use
to move to the desired "Tuner Mode". (See page. 22)
to select.
Automatically "Auto Search" beginning.
¶U After "Auto Search" ends, select the desired Language.
to move to the desired "Language".
to select.
to Exit menu.