Dtv Connections; Viewing Dtv - DAYTEK PLASMA DISPLAY User Manual

DTV Connections

Connecting to the component terminal
°‹
°ÿ
Connection terminals of other appliances differ by manufacturer and model.
< PDP TV Back view >
1. Connect PDP TV's Y, P
2. Connect PDP TV's Audio terminals (left & right) in Component 1 to DTV receiver's Audio Out terminal using the
Audio cable.
3. It musts agree Component's number of Y, P
°ÿ DTV receiver's output terminal can be marked Y, P
°‹ Connecting to the PC/DVI terminal
< PDP TV Back view >
°§ Some of DTV receiver(Set-Top-Box) have an PC Connector (D-Sub 15pin), DVI connector instead of Component output .
°§ Connect Audio Cable from the Audio output terminal of receiver to the PC Audio input terminal of the PDP TV.

Viewing DTV

1. Turn on the PDP TV and press
2. Use to move to "Component 1 or 2".
°§If D-Sub 15 Pin has been connected, select PC.
°§If DVI-D has been connected, select DVI.
3. Turn on the DTV receiver and select the channel that you want.
1 8
Connection
, P terminal in Component 1 to DTV receiver's Video Out terminal using the external cable.
B R
, P terminal and Audio terminal.
B R
, P
B R
Analog RGB(D-Sub 15 pin) Cable
on the remote controller.
Component Audio Cable
Component Connection Cable
or Y, C , C according to products.
B R
DVI- D Cable
PC Audio Cable
< DTV receiver>
Y P P
( R ) ( L )
B R
< DTV receiver>
( R ) ( L )
Y P P
B R