Performance Specifications - JEFF ROWLAND 6 Owner's Manual

Performance Specifications

Output Power
Continuous RMS watts
@ 8 ohms 150 watts
@ 4 ohms 250 watts
0.5 Hz to 160 kHz, -3 dB
Power Bandwidth
80 volts per microsecond
Slew Rate
Less than 0.05% at rated power
THD and Noise
Greater than 100, 20 Hz to 20 kHz, 8 ohms
Damping Factor
35 amps continuous, 50 amps peak
Output Current
Overall Gain
User selectable on rear panel
& Sensitivity
(1 watt, 8 ohms) 26 dB or 32 dB; 141 mV or 71 mV
User selectable on rear panel
Input Impedance
Unbalanced 18k or 600 ohms
Balanced 18k or 600 ohms
Common Mode
Greater than 60 dB, 20 Hz to 20 kHz
Rejection Ratio
Operation / Specifications
25 watts standby; 225 watts operating, idle;
Power Consumption
400 watts per Amplifier maximum
Inputs
Unbalanced With supplied XLR/RCA adapter
Balanced XLR connector
1 pair binding posts
Outputs
17.5 in. W x 14.25 in. D x 5.25 in. H
Dimensions
44.5 cm W x 36.2 cm D x 13.3 cm H
24 in. W x 20 in. D x 12 in. H
Shipping Dimensions
61 cm W x 50.8 cm D x 30.5 cm H
45 lbs. (20.5 kg)
Weight
71 lbs. (32.0 kg)
Shipping Weight
Because Jeff Rowland Design Group is constantly analyzing new
design improvements, we reserve the right to change or modify product
specifications without notice or obligation.