Technical Specifications; Damping Factor - JEFF ROWLAND 7 Owner's Manual

Output power
Power Bandwidth
Slew Rate
THD and Noise

Damping Factor

Output Current
Overall Gain
Sensitivity
Input Impedance
Power Requirements
Dimensions
Damping Factor

Technical Specifications

350 watts RMS continuous, 8 ohms
700 watts RMS continuous, 4 ohms
1100 watts RMS continuous, 2 ohms
0.15 Hz to 175 kHz, -3 dB
50 volts per microsecond
Less than .015%, 1 kHz, 8 ohms, 20 watts
Less than .045%, 1 kHz, 8 ohms, 100 watts
Less than .06%, 1 kHz, 8 ohms, 200 watts
Greater than 300, 20 Hz to 20 kHz, 8 ohms
Greater than 90, 100 kHz, 8 ohms
50 amps peak, continuous
150 amps peak, 0.1 ohm, 20 msec, 1 kHz
26.4 dB
136 mV, 1 watt, 8 ohms
Selectable: 100k, 20k, 600 ohms
100V-240V
19 in. W x 8.75 in. H x 24 in. D
48 cm W x 22 cm H x 61 cm D
Greater than 120, 20 Hz to 20 kHz, 8 ohms
Greater than 80, 100 kHz, 8 ohms