Advertisement
Quick Links
F
O
R
Your new Linear Power™ 401
combining reliability, high power, low distortion, and freedom from external noise.
When properly installed, it will give long and faithful service. When combined with
other high quality components, it will be the heart of a superb system. Thank you
for purchasing a Linear Power™ Product.
Read the following instructions completely through. If they appear too
complicated, we recommend that you have an authorized LINEAR POWER™
Dealer do the work.
1. Amplifier Cooling: The amplifier will operate best if it is kept as cool as
possible. Mount in a position that allows air to flow freely through the fins. Be
sure there is ample space above the amplifier to avoid trapping heated air rising
from the amplifier. The amplifier should not be mounted upside down.
2. Accessibility: Mount your amplifier in a position that allows ample room for
installation, removal and attachment of leads, and gain adjustments.
3. Insulation: Be sure that the metal case of the amp does not touch the metal of
the car. Do not remove or damage the rubber grommets that provide electrical
insulation and vibration isolation.
T
H
E
L
O
MODEL 401
(1981-MSRP $159.00)
OWNER'S MANUAL AND
INSTALLATION GUIDE
INTRODUCTION
amplifier employs a sophisticated design
©
INSTRUCTIONS
MOUNTING
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
LINEAR POWER™ is a trademark of Linear Power, Inc.
V E
O
F
M
U
©
™
S
I
C
1
Advertisement
Related Manuals for Linear Power 401
Summary of Contents for Linear Power 401
- Page 1 Linear Power™ Product. INSTRUCTIONS Read the following instructions completely through. If they appear too complicated, we recommend that you have an authorized LINEAR POWER™ Dealer do the work. MOUNTING 1. Amplifier Cooling: The amplifier will operate best if it is kept as cool as possible.
- Page 2 It should be connected to the battery positive terminal or as close to the battery as possible. Use the fuse holder and fuse provided and replace only with the same size fuse. The LINEAR POWER™ uses a 5 amp AGC fuse.
- Page 3 The Model 401 amplifier must use an external pre-amp or crossover to be used © as a bridgeable amplifier. They must be bridged using a Linear Power™ crossover such as the Linear Power™ XO-1 , XO-2 , or similar brand ©...
-
Page 4: Operation/Adjustment
1.The hookup method with the least noise in one vehicle may be the noisiest in another. 2.Most noise problems start at the music source. Your LINEAR POWER™ amplifier will accurately reproduce any sound present in the signal path. NO amplifier can discriminate between music and engine noise. -
Page 5: Installation Rules
7. If the noise remains when the inputs are removed, re-route the power connections and check for the proper ground connections (see note B). © 2008 Linear Power, Inc. - ALL RIGHTS RESERVED LINEAR POWER™ is a trademark of Linear Power, Inc. -
Page 6: Service Or Repair
3 4 5 5 L A N EL L L A N E, P E A R L, M S 3 9 2 0 8 (6 0 1) 9 3 2 – 8 4 7 7 © 2008 Linear Power, Inc. - ALL RIGHTS RESERVED... -
Page 7: Specifications
3 4 5 5 L A N E L L L A N E, P E A R L , M S 3 9 2 0 8 (6 0 1) 9 3 2 - 8 4 7 7 © 2008 Linear Power, Inc. - ALL RIGHTS RESERVED...