Advertisement
401 Speaker Connector
OPERATION IN BRIDGE MODE
The Model 401
amplifier must use an external pre-amp or crossover to be used
©
as a bridgeable amplifier. They must be bridged using a Linear Power™
crossover such as the Linear Power™ XO-1
, XO-2
, or similar brand
©
©
crossover or pre-amp with inverting capabilities. One channel of the inputs of
these amplifiers must receive an inverted signal in order to have the needed
inverted signal on one channel at the output. Speaker connection can then be
made from LEFT (+) and RIGHT (+). This amplifier is a minimum of 8-ohm
bridgeable, for utmost reliability and sound quality. This amp is not recommended
for 4–ohm bridged loads.
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
3
LINEAR POWER™ is a trademark of Linear Power, Inc.
Advertisement
