Iiyama ProLite B2280HS User Manual page 24

Others
Adjustment Item
Reset
Signal Select
At selected the AUTO, it will automatically be selected when just one source is available.
NOTE
If there are more input sources available and you select one of them, the AUTO option is
not available.
If multiple inputs are connected, the monitor may not recover the last one used after turning
it off and on again.
It is only possible when you set a specifi c source.
HDMI audio*
Information
* Suitable for HDMI input only.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
 Signal Select: Press the AUTO button when the Menu is not displayed, it shows following Menu.
You can then select input source press the AUTO button and press the MENU button.
Reset
Signal Select
HDMI audio
Information
Input :
Resolution :
H.Frequency :
V.Frequency :
Problem / Option
Yes Factory-preset data is restored.
No Return to Menu.
Auto Select the signal input automatically.
D-SUB Select the Analog input.
Direct
DVI Select the Digital (DVI) input.
HDMI Select the Digital (HDMI) input.
HDMI Select the HDMI input.
LINE IN
Select the LINE IN input.
Displays information regarding the current input signal coming
from the graphic card in your computer.
See your graphic card user guide for more information
NOTE
about changing the resolution and refresh.
Others
Yes
Auto
LINE IN
D-SUB
1920(H) 1080(V)
68KHz
60Hz
D-SUB
DVI
HDMI
Button to Press
OPERATING THE MONITOR 19