Iiyama ProLite E2207WS User Manual page 19

 Press the Auto Button. (Auto Image Adjust)
 Adjust the image manually by following procedure below when the screen has a flicker or
blur, or the picture does not fit in the display area after performing the Auto Adjust.
 Adjust the V.Position so that the top and bottom of the picture frame will fit to the display
area.
 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge
of the display area.
2) Stretch the right side of the picture frame to the right edge of the display area by adjusting
the H.Size.
NOTE  When the left side of the picture frame moves apart from the left edge of the display
NOTE
area during the H.Size adjustment, adjust steps 1) and 2).
 Another way to make the H.Size adjustment is to correct the vertical wavy lines in the
zebra pattern.
 The picture may flicker during the H.Size, H.Position and V.Position adjustment.
 In case the picture frame is bigger or smaller than the data display area after the H.Size
adjustment, repeat steps from .
OPERATING THE MONITOR
1
15