Operating The Monitor - Iiyama ProLite E2207WS User Manual

OPERATING THE MONITOR

To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 21. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 14 for SCREEN ADJUSTMENTS.
 Press the Menu Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the  / 
 Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the Select Button. Then, use the  /  Buttons to highlight
the desired adjustment icon.
 Press the Select Button again. Use the  /  Buttons to make the appropriate
adjustment or setting.
For example, to correct for vertical position, select Menu item of Image Adjust and then press the
Select Button. Then, select
Main Menu
Auto Image Adjust
Contrast/Brightness
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
1 : Exit
An adjustment page appears after you press the Select Button. Press the Select Button again.
 / 
Then, use the
overall display should be changing accordingly while you are doing this.
NOTE
When button operations are aborted during adjustment, On-Screen Display disappears when the

time set for the OSD Time Out has passed. Also, press the Menu button to quickly turn off the On-
Screen Display.
 Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
ADJUSTING
Adjustments for H. / V. Position, H.Size and Fine Tune are saved for each signal timing. Except for

these adjustments, all other adjustments have only one setting which applies to all signal timings.
Main Menu
Auto Image Adjust
Contrast/Brightness
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
1 : Exit
(H. / V.Position) by using the
VGA
2 : Select
Buttons to change the vertical position settings. The vertical position of the
VGA
2 : Select
/ 
Manual Image Adjust
Horizontal Size
H./V. Position
Fine Tune
Sharpness
Video Mode adjust
Opticolor Mode
1 : Exit
Buttons.
Buttons.
2 : Select
OPERATING THE MONITOR 9