Icom IC-F70DS Instruction Manual page 12

2
PANEL DESCRIPTION
SCAN ADD/DEL (TAG) KEY "SCAD"
Push to add or delete the selected channel to/from the scan
group.
PRIO A/B KEYS "PRA"/"PRAR"/"PRB"/"PRBR"
➥ Push to select Priority A or Priority B channel.
➥ Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] to
rewrite the Priority A or Priority B channel to the selected
channel.
MR-CH 1/2/3/4 KEYS "CH1"/"CH2"/"CH3"/"CH4"
Push to select an operating channel directly.
MONI (AUDI) KEY "MON"
➥ Mute and release the CTCSS (DTCS) or 2-tone squelch
mute. Open any squelch/deactivate any mute while push-
ing this key. (LMR operation only)
➥ Activates one of (or two of) the following functions on each
channel independently: (PMR or BIIS PMR operation only)
• Push and hold to un-mute the channel (audio is emitted; 'Audible'
condition).
• Push to mute the channel (sets to 'Inaudible' only).
• Push to un-mute the channel (sets to 'Audible' only).
• Push after the communication is finished to send a 'reset code'.
NOTE: The un-mute condition ('Audible' condition) may
automatically return to the mute condition ('Inaudible' con-
dition) after a specified period depending on programming.
8
LIGHT KEY "LIGT"
Push to turn the transceiver's backlight ON temporarily only
when the backlight function is turned OFF in user set mode.
LOCK KEY "LOCK"
➥ Push and hold for 1 sec. to electronically lock all program-
mable keys except the following:
[Call] (incl. Call A and Call B), [Moni(Audi)] and [Emergency].
➥ Push and hold for 1 sec. again to turn the lock function OFF.
HIGH/LOW KEY "H/L"
Push to select the transmit output power temporarily or per-
manently, depending on the pre-setting.
• Ask your dealer for the output power level for each selection.
C.TONE CH ENT KEY "TSEL"
Push to select the continuous tone channel using [CH Up]/
[CH Down] to change the tone frequency/code setting. The
selected channel remains set as the continuous tone chan-
nel until another channel is designated as such.
TALK AROUND KEY "TA"
Push to turn the talk around function ON and OFF.
• The talk around function equalizes the transmit frequency to the
receive frequency for transceiver-to-transceiver communication.
WIDE/NARROW KEY "W/N"
Push to toggle the IF bandwidth between wide and narrow.
• The wide passband width can be selected from 25.0 or 20.0 kHz
using the CS-F70/F1700
CLONING SOFTWARE
operation only) Ask your Dealer for details.
. (PMR or BIIS PMR