Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gaggenau AT 400
Summary of Contents for Gaggenau AT 400
- Page 1 Gaggenau Operating Instructions Table Ventilation AT 400...
-
Page 3: Table Of Contents
Contents Safety notes Operating for the first time Maintenance Features of your new appliance Accessories Special accessories Accessories for installation Operating principle Operation Ventilation Intensive mode Light Special functions Setting the intensive mode duration Delayed shut-off Interval ventilation Cleaning and care Cleaning the housing Cleaning the grease filters Replacing the activated carbon filter... -
Page 4: Safety Notes
Safety notes Do not operate a damaged appliance. RISK OF INJURY Carefully read through the operating instructions Do not allow children to play with the extractor before operating the table ventilation. hood! Adults and children must never operate the Keep the operating instructions for further appliance unsupervised reference. -
Page 5: Operating For The First Time
If the power supply is functioning correctly, but your appliance still does not work, please contact your dealer or your local Gaggenau customer service agency. Repairs may only be carried out by authorised technicians, in order to guarantee the safety of the •... -
Page 6: Features Of Your New Appliance
Combination of AT 400-101 with Gaggenau hob CE 490 /CI 490 cover light air inlet control panel Combination of AT 400-131 with three Gaggenau Vario 400 series appliances Control panel grease filter saturation display light delay shut off intensive mode... -
Page 7: Accessories
• AA 409-900: Telescopic extension for • 476 358: Grease fine filter for AT 400-100 AT 400-101 • 476 363: Grease fine filter for AT 400-130 • AA 409-930: Telescopic extension for AT 400-131 Telescopic extension max. -
Page 8: Operating Principle
Operating principle The table ventilation is an effective air recirculation system, which extracts the vapours directly behind the cooktop towards the rear. The centrifugal grease filters separate the greasy components from the extracted air. The grease is collected in the trays. -
Page 9: Operation
Operation When pressed, all functions selection keys are backlit in green, except 0 (“Motor off”). Ventilation Three fan speeds and one intensive speed are available. You set the fan speed required for each respective cooking process by pressing the function selector keys 1, 2, 3 or Int. Intensive mode The Int key for the intensive level should be pressed when browning and frying in an open pan. -
Page 10: Special Functions
Special functions Setting the intensive mode duration You can select an intensive level running time of 3, 5 or 10 minutes by simultaneously pressing the Int key and the 1, 2 or 3 key. When delivered, the appliance is set to five minutes, i.e. the combination of the Int key and the key 2. -
Page 11: Cleaning And Care
Cleaning and care Cleaning the housing Clean the stainless steel surface of the ventilator housing with mild detergent solution or a non- scouring stainless steel cleaner. Only wipe in the the direction of the brushed surface. To finish, apply some stainless steel care agent with a soft cloth. -
Page 12: Cleaning The Grease Filters
Cleaning the grease filters The grease filter saturation display F flashes after an operating time of 10 hours to indicate that you should clean the grease filters. Depending on the cooking habits it may be necessary to clean the grease filters at shorter intervals (for example if kitchen smells appear when the ventilation is switched off). -
Page 13: Replacing The Activated Carbon Filter
Replacing the activated carbon filter (only for air recirculation mode) The activated carbon filter in the fan housing (lower part of the appliance) eliminates smells from the extracted air. For hygenic reasons, change the activated carbon filter together with the grease fine filter at least every six months or when kitchen smells appear. -
Page 14: Lamp Replacement
Lamp replacement Wait until the appliance has cooled down before replacing lamp. Disconnect the appliance from the mains (switch off fuse). Remove loose objects from the cover. Lift off cover. First turn florescent lamp in the socket, then lift off fluorescent lamp. Only replace defective fluorescent lamp by lamp of the same type. - Page 16 Gaggenau Hausgeräte GmbH Carl-Wery-Straße 34 D-81739 München www.gaggenau.com...
Need help?
Do you have a question about the AT 400 and is the answer not in the manual?
Questions and answers