Basic Operation
On screen messages
Some messages are displayed on the screen during
channel changing or during programs.
NO SIGNAL
When STB cannot receive a channel signal, the
whole screen becomes gray, then NO SIGNAL
appears in the center.
This may occur when:
the signal is too weak
•
the channel is not broadcasting
•
the antenna cable is not connected
•
Screen:
NO SIGNAL
SCANNING
When STB is trying to receive a signal, the whole
screen becomes gray, then SCANNING appears in
the center.
SCANNING
46
RESTRICTED PROGRAM
When you have set V-CHIP and you receive a
program that meets any setting of yours, the whole
screen becomes gray, then RESTRICTED
PROGRAM appears in the center.
Please refer to "Setting for V-CHIP/CC" on page 80
for further information.
26-1
NOTE:
Press INFO button to verify the rating of a program
currently being received.
Remote:
No description provided.
TV-14 D
No description provided.
26-1
RESTRICTED PROGRAM
Cowboy
ENGLISH STEREO
RESTRICTED PROGRAM
The rating of this program
51-1