1. Manuals
  2. Brands
  3. Sylvania Manuals
  4. TV Receiver
  5. SRZ3000
  6. Owner's manual

Sylvania SRZ3000 Owner's Manual

Atsc/ntsc stb sylvania
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ATSC/NTSC STB
SRZ3000
that this product meets the E
guidelines for energy efficiency. E
is a U.S. registered mark.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
As an E
S
®
NERGY
TAR
Partner, our company has determined
NERGY
NERGY
S
®
TAR
S
®
TAR

Advertisement

Table of Contents
loading

Related Manuals for Sylvania SRZ3000

Summary of Contents for Sylvania SRZ3000

  • Page 1 ATSC/NTSC STB SRZ3000 As an E ® NERGY Partner, our company has determined that this product meets the E ® NERGY guidelines for energy efficiency. E ® NERGY is a U.S. registered mark. INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

  • Page 2: Table Of Contents

    Table of Contents 6 Appendix and Warranty ..97 1 Before Using ....Troubleshooting....98 Important Safeguards.

  • Page 3: Before Using

    Before Using Before Using In this section Important Safeguards Precautions Information on digital broadcasting Major features of STB Location of controls Accessories Installing batteries Reference to SETUP menu This section consists of important things, including safety guidelines, that you should know before using STB.

  • Page 4: Important Safeguards

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DAN- CAUTION GEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT RISK OF ELECTRIC SHOCK WITHIN THIS UNIT. DO NOT OPEN THIS SYMBOL INDICATES THAT THERE CAUTION: TO REDUCE THE RISK OF ELECTRIC...
  • Page 5 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N W I R E GROUND C L A M P A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T...

  • Page 6: Precautions

    PRECAUTIONS PRECAUTIONS LOCATION IMPORTANT COPYRIGHT INFORMATION Unauthorized recording or use of broadcast televi- For safe operation and satisfactory performance of sion programming, video tape, film or other copy- your this product, keep the following in mind when righted material may violate applicable copyright selecting a place for its installation: laws.

  • Page 7: Information On Digital Broadcasting

    Before Using Information on digital broadcasting ATSC NTSC Receives both Analog/digital ATSC and NTSC terrestrial signals Analog/digital terrestrial antenna Digital broadcasting is the most advanced format of broadcasting, employing a new technology for compression of audio and video signals which allows broadcasters to transmit digital signals using existing terrestrial systems.

  • Page 8: Major Features Of Stb

    Before Using Major features of STB Capable of receiving digital (ATSC*), analog (NTSC*), and cable (NTSC) broadcasts • Capable of receiving High Definition TV broadcasts • Capable of receiving Dolby® digital 5.1 audio • Alternate languages for OSD are available. •...

  • Page 9: Location Of Controls

    Before Using Location of controls FRONT PANEL 5 6 7 1 POWER button: Turns STB on and off. 2 POWER indicator: Lights up while STB is on. NOTE: When turning the STB on, the power indicator will blink first and light up. When turning the STB off, the power indicator will blink first and go off.

  • Page 10: Rear Panel

    Before Using REAR PANEL 1 ANT. IN Jack: Use to connect an antenna to STB. 2 DIGITAL AUDIO (COAXIAL) Jack: Use to connect a decoder or an amplifier to STB with a digital coaxial cable. NOTE: You must use this jack and a Dolby® Digital receiver for Dolby® Digital 5.1 playback. 3 AUDIO R/ L Jacks: (2 pairs) Use to connect your TV, a stereo system or a VCR to STB with standard audio cables.

  • Page 11: Remote Control

    Before Using REMOTE CONTROL 1 POWER button: Turns STB on and off. 2 Number buttons: Use to input channel numbers and passwords, and to set time. 3 ENTER button: In SETUP menu, press to determine your selection. 4 CH buttons: o / p Press to change the channels up or down.

  • Page 12: Accessories

    STB: 1 Unsnap the battery cover from the back of the remote control. SRZ3000 Remote controller unit and AA batteries (x2) 2 Install two AA batteries making sure the polarity (+ / -) direction is correct.

  • Page 13: Reference To Setup Menu

    Before Using Reference to SETUP menu SETUP WIZARD ( Refer to page 30 through page 35. ) SETUP WIZARD SETUP WIZARD guides you through initial setup. "SETUP" "Create new setup" "QUIT" "Keep old setup" QUIT SETUP Setting the clock (Manual) Language for screen (1/8) (5/8) ( Refer to page 30.

  • Page 14: Screen Ratio

    Before Using CHANNEL DISPLAY ( Refer to page 52, 55, 58, 61.) ( Refer to page 64, 66.) CHANNEL DISPLAY QUIT QUIT SCREEN RATIO ADD/DELETE ANTENNA DISPLAY MODE LETTERBOX CHANNEL CHANNEL AUTOSCAN DISPLAY DISPLAY CLOCK CLOCK DETAIL DETAIL Adding channels / Selecting screen formats Deleting channels (Screen ratio)
  • Page 15 Before Using CLOCK ( Refer to page 70, 71, 73, 75. ) CLOCK 2002/ 1/31( THU ) 2 50PM QUIT TIME ZONE CENTRAL CHANNEL MANUAL DISPLAY AUTO CLOCK DETAIL Setting the clock (Daylight Savings Time) ( Refer to page 71. ) CLOCK QUIT CHANNEL...
  • Page 16 Before Using DETAIL ( Refer to page 77, 80, 81, 82, 84, 88, 92, 95. ) DETAIL QUIT V-CHIP / CC CHANNEL MENU LANGUAGE ENGLISH DISPLAY CLOCK DETAIL V-CHIP/CC password window Setting for V-CHIP/CC ( Refer to page 81. ) ( Refer to page 82.

  • Page 17: Connections

    Connections Connections In this section Connections to antenna Connections to other devices This section allows you to finish the initial setup of STB. Connections to antenna and Connections to other devices are the important procedures to receive signals appropriately and to enjoy the features of STB.

  • Page 18: Connections To Antenna

    Connections Connections to antenna Use a standard antenna cable to connect the wall jack to the ANT IN Jack on STB. STB connection to the antenna NOTE: Antenna and antenna cable are not included. To the antenna Rear panel of STB WHEN CONNECTING TO CABLE BOX ALSO: NOTE: Antenna, antenna cable and Cable box are not included.
  • Page 19 Connections CAUTION When you connect the antenna cable to another device, be sure to use a splitter as shown below. NOTE: Right Antenna, antenna cable and Splitter are not included. Antenna cable Splitter e.g.: Connection to VCR RF-IN Antenna cables RF-OUT ANT.

  • Page 20: Connections To Other Devices

    Connections Connections to other devices There will be various ways of connecting STB to other devices. Make your connection according to your choice of devices, screen format, and sound format. You will find some sample connections in the following pages. All jacks on STB will not need to connected.
  • Page 21 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV.
  • Page 22 Connections STB connection using S-VIDEO output to SDTV NOTE: S-video cable and audio cable are not included. Rear panel of STB Audio cable To audio input jacks (L, R) S-video cable To S-video input jack 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV.
  • Page 23 Connections STB connection using VIDEO output to SDTV NOTE: Audio cable and video cable are not included. Rear panel of STB Audio cable Video cable To audio input jacks (L, R) To a video input jacks 1 Use a standard antenna cable to connect the wall jack to the ANT. IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV.
  • Page 24 Connections STB connection to a standard stereo system NOTE: Component video cable and audio cable are not included. Rear panel of STB Component video cable STEREO COMPONENT To component video input jacks (Y/ Pb/ Pr) Audio cable To audio input jacks (L, R) 1 Use a standard antenna cable to connect the wall jack to the ANT.
  • Page 25 Connections STB connection to a decoder with Dolby Digital NOTE: Coaxial digital audio cable and component video cable are not included. Rear panel of STB To component video input jacks (Y/ Pb/ Pr) Digital Decoder Coaxial digital audio cable To Coaxial digital Component audio input jack video cable...
  • Page 26 Connections STB connection to TV and Video devices (VCR, DVD recorder, etc) NOTE: e.g.: Connection to VCR Audio cables and video cables are not included. Rear panel of STB To audio input jacks (L, R) Audio cable Audio cable Video cable To video input Video jack...
  • Page 27 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the set of audio output jacks (L, R) on STB to the set of audio input jacks (L, R) on the VCR.
  • Page 28 - MEMO -...

  • Page 29: Initial Setups (Setup Wizard)

    Initial Setups (Setup Wizard) Initial Setups (Setup Wizard) In this section Initial setup In Initial setup, you can finish the initial settings of STB through SETUP WIZARD instantly.

  • Page 30: Initial Setup

    Initial Setups (Setup Wizard) Initial setup 1 SETUP WIZARD will appear. SETUP WIZARD Screen: SETUP WIZARD is the very convenient menu for you to make the initial settings of STB. SETUP WIZARD When STB is turned on for the first time after connecting the AC power cord, SETUP WIZARD is SETUP WIZARD guides you displayed on the screen automatically.
  • Page 31 Initial Setups (Setup Wizard) 3 Select a desired language using o o / p p 5 SETUP WIZARD 3/8 will appear. navigation buttons, then press ENTER. The selected language will be activated. • SETUP WIZARD 3/8 SETUP WIZARD 2/8 will appear. •...
  • Page 32 Initial Setups (Setup Wizard) 7 Select the desired time zone using 8 Enter YEAR, DATE and TIME using o o / p p o o / p p navigation buttons, then press navigation buttons or number / s s / B B / s s / B B ENTER.
  • Page 33 Initial Setups (Setup Wizard) 9 Press ENTER when the cursor is on 10 Select the desired channel to search SET. from the channel map using o o / p p Your settings will be activated. navigation buttons. • SETUP WIZARD 6/8 will appear, then STB will •...
  • Page 34 Initial Setups (Setup Wizard) 12 Select the desired screen ratio using When not using the auto-clock setting: o o / navigation buttons, then press Select OFF on the channel map, then press ENTER. ENTER. SETUP WIZARD 8/8 will appear. • CLOCK Select a channel for auto clock setting.
  • Page 35 Initial Setups (Setup Wizard) 13 Select the desired display mode using navigation buttons, then press ENTER. SETUP WIZARD is completed. • STB will now start receiving broadcasts. World News 25 26-1 WWOR ENGLISH STEREO NOTE: Refer to “Selecting screen formats” on page 64 for further information.
  • Page 36 - MEMO -...

  • Page 37: Basic Operation

    Basic Operation Basic Operation In this section Watching TV Channel banner Choosing audio and language Picture Still On screen messages You can find the basic operation to enjoy your STB in this section. This section contains some convenient information when watching TV program, for example, sub-channles on the digital channels and channel banner.

  • Page 38: Watching Tv

    Basic Operation Watching TV 1 Turn the TV on and select the input to which the STB is connected to. STB is capable of receiving analog (NTSC format) and digital (ATSC format) broadcasts. All available channels from any of these broadcast sources can be tuned in using the CH buttons 2 Turn the STB on.
  • Page 39 Basic Operation When using number buttons (E.g., entering 2. Press ENTER. STB will tune in channel 26-1, and the program 26-1): • being broadcast will be displayed. 1. Enter the main channel number, press the “ ” – button, then enter the sub-channel number. NOTE: Sub-channel numbers from NTSC are always 0.
  • Page 40 Basic Operation When returning to the channel you were last About sub-channel broadcasting: watching: There may be different programs being broadcast on sub-channels through a single channel from ATSC. You can watch each sub-channel program being broadcast by selecting one of the sub-channels. NTSC ATSC 18:00...

  • Page 41: Channel Banner

    Basic Operation 1 Press INFO to display a channel Channel banner banner. Channel information will appear in the channel • The channel banner provides you with information banner. on the channel you have selected. Remote: Screen: Puffy the Vampire Slayer 26-1 WWOR TV-Y...
  • Page 42 Basic Operation Components of Channel Banner Logo for broadcast source : Indicates whether the channel is a digital broadcast or an analog broadcast. Puffy the Vampire Slayer Program title 26-1 WWOR Channel number : Program rating TV-Y ENGLISH MONAURAL Indicates the current channel number. 2:00PM- 3:00PM Doublement Palace: Puffy takes a new job at a fast food restaurant Program description...

  • Page 43: Choosing Audio And Language

    Basic Operation Choosing audio and language When the channel you are tuning in provides alternate audio formats and languages, you can change to any alternate. When you are tuning in ATSC, language and format can be set at the same time through an audio-map. Audio map: (Only when tuning in ATSC) Audio format and language outputs from a broadcasting station are stored in an audio-map.
  • Page 44 Basic Operation When tuning in ATSC: The sequence will repeat according to audio-map 1 Press AUDIO button. when the AUDIO button is pressed. Remote: No description provided. 77-1 CAT0001 ENGLISH 1/3 STEREO When tuning in NTSC: The sequence will repeat as shown below when available.

  • Page 45: Picture Still

    Basic Operation Picture Still 1 Press STILL button while watching You can stop the picture on the screen anytime by STILL will be indicated on the lower left while • pressing STILL button. the picture is displayed. Remote: Screen: STILL NOTE: During STILL, the programs audio will continue.

  • Page 46: On Screen Messages

    Basic Operation RESTRICTED PROGRAM On screen messages Some messages are displayed on the screen during When you have set V-CHIP and you receive a channel changing or during programs. program that meets any setting of yours, the whole screen becomes gray, then RESTRICTED PROGRAM appears in the center.

  • Page 47: Advanced Operation

    Advanced Operation Advanced Operation In this section Electronic Program Guide (EPG) Setup menu for preference CHANNEL Adding channels Deleting channels Adjusting antenna Receiving channels DISPLAY Selecting screen formats (Screen ratio and Display mode) CLOCK Setting the clock DETAIL Setting a new password Setting for V-CHIP/CC Setting MPAA rating Setting TV rating...

  • Page 48: Electronic Program Guide (Epg)

    Advanced Operation Electronic Program Guide (EPG) 1 Press EPG button while watching TV. EPG will appear on the screen. • Electronic Program Guide (EPG) is an application for digital channels that lists current and scheduled Remote: programs that are or will be available on each channel and a short summary or commentary for each program.
  • Page 49 Advanced Operation 2 Select the desired program using 3 Press ENTER. o o / p p / navigation buttons. s s / B B When selecting a program being broadcast: The cursor will move as you press any navigation • The selected program will appear.
  • Page 50 Advanced Operation Components of Electronic Program Guide (EPG) Current bar : Indicates the current time (so you can see how close you are to the start or end time of the program). CURRENT TIME: Current time 1 / 31 ( THU ) 3 : 01PM 3:00PM 4:00PM Day of broadcasting...

  • Page 51: Setup Menu For Preference

    Advanced Operation Setup menu for preference includes: • ADD / DELETE: You can add or delete channels in the channel map. • ANTENNA: You can verify and adjust the signal strength of each channel to get a clearer picture. • AUTOSCAN: You can get available channels automatically into the channel map by completing AUTOSCAN.

  • Page 52: Channel

    Advanced Operation E.g., When adding the digital channel 26-1. Adding channels 1 Press SETUP to display SETUP menu. SETUP menu will appear. • ADD/ DELETE You can add channels in the channel map. Remote: ADD: You can add desired channels to the channel map. Once you add channels to a channel map, you will be allowed to select the channels in order using CH buttons.
  • Page 53 Advanced Operation 2 Select CHANNEL using navigation 4 To add, first enter the digital channel o o / p p buttons, then press ENTER. number 26-1. CHANNEL menu will appear. • ADD/DELETE 26-1 CHANNEL QUIT QUIT DELETE CHANNEL ADD/DELETE ANTENNA CHANNEL DISPLAY AUTOSCAN...
  • Page 54 Advanced Operation INFORMATION on Channel Map 5 Select ADD using navigation o o / p p buttons, then press ENTER. ADD/DELETE 26-1 26-1 will be added to the channel map. • QUIT DELETE CHANNEL DISPLAY CLOCK DETAIL Channel map ADD/DELETE 26-1 : Indicates an analog channel.

  • Page 55: Deleting Channels

    Advanced Operation E.g., To delete the digital channel 26-1. Deleting channels 1 Press SETUP to display SETUP menu. SETUP menu will appear. • ADD/ DELETE You can add and delete channels in the channel map. Remote: DELETE : You can delete channels from the channel-map. NOTE: When you delete digital and analog channels with the same main channel number, you will need to delete...
  • Page 56 Advanced Operation 3 Select ADD/DELETE using 4 Select DELETE using navigation o o / p p o o / p p navigation buttons, then press ENTER. buttons, then press ENTER. ADD/ DELETE menu will appear. The cursor will move to the channel map. •...
  • Page 57 Advanced Operation 5 Select the digital channel number 26 6 Press ENTER when the cursor is on the using navigation buttons. o o / p p digital channel 26. 26-1 will be indicated in the box at the top of the •...

  • Page 58: Adjusting Antenna

    Advanced Operation E.g., when adjusting the digital channel 26-1. Adjusting antenna 1 Select channel 26-1 to adjust using number button or CH buttons. o o / p p ANTENNA Channel 26-1 will be tuned in. • You can verify the signal strength of each channel to get a clearer picture for both digital and analog Remote: broadcasts.
  • Page 59 Advanced Operation 2 Press SETUP to display SETUP menu. 4 Select ANTENNA using navigation o o / p p SETUP menu will appear. • buttons, then press ENTER. ANTENNA menu will appear, then STB starts • receiving the signal strength of the channel. SETUP QUIT ANTENNA...
  • Page 60 Advanced Operation 5 Adjust the antenna direction to get the best reception. A status bar stretches to the right according to the • signal strength. The value will be indicated on the left of the • status bar so that you can adjust the antenna direction.

  • Page 61: Receiving Channels

    Advanced Operation Receiving channels 1 Press SETUP to display SETUP menu. SETUP menu will appear. • AUTOSCAN Remote: STB has the convenient function to get available channels automatically. AUTOSCAN is capable of receiving available channels, both analog and digital, and storing those channels in a channel map.
  • Page 62 Advanced Operation 3 Select AUTOSCAN using 4 Select NEXT using navigation o o / p p s s / B B navigation buttons, then press ENTER. buttons, then press ENTER. AUTOSCAN menu will appear. Scanning window will appear, then STB will start •...
  • Page 63 Advanced Operation 5 AUTOSCAN is complete. To cancel AUTOSCAN during scanning: SETUP menu will go off automatically. • Press SETUP or ENTER to cancel. STB will receive broadcasts right after • AUTOSCAN CANCELLED will appear on the • AUTOSCAN is complete. screen.

  • Page 64: Selecting Screen Formats (Screen Ratio And Display Mode)

    Advanced Operation Selecting screen formats 1 Press SETUP to display SETUP menu. SETUP menu will appear. • STB allows you to select a screen ratio and a display mode (aspect ratio) to match the formats of the Remote: program being broadcast and your TV screen. You can also change to aspect ratios you prefer to watch.
  • Page 65 Advanced Operation 3 Select SCREEN RATIO using 5 Press ENTER to exit SETUP menu. o o / p p navigation buttons, then press ENTER. Screen ratio options will appear. • NOTE: The screen ratio should be selected to fit your TV screen.
  • Page 66 Advanced Operation DISPLAY MODE 1 Press SETUP to display SETUP menu. SETUP menu will appear. • Remote: 2,3,4 Screen: SETUP 2,3,4 QUIT CHANNEL DISPLAY CLOCK DETAIL 2 Select DISPLAY using navigation o o / p p buttons, then press ENTER. DISPLAY menu will appear.
  • Page 67 Advanced Operation 3 Select DISPLAY MODE, using 4 Select the desired display mode using o o / p p navigation buttons , then press ENTER. navigation buttons, then press o o / p p Display mode options will appear. ENTER. •...
  • Page 68 Advanced Operation INFORMATION on 4:3 TV 5 Press SETUP to exit SETUP menu. When your 4:3 TV (capable of receiving a 1080i signal) with the screen ratio 4:3 receives a 1080i CAUTION: video output signal from STB, black/gray bars If the TV is left in LETTERBOX or SIDEBAR for a may appear at the top and bottom of the screen.
  • Page 69 Advanced Operation INFORMATION on Screen Ratio and Display Mode For standard 4:3 TVs displaying widescreen 16:9 broadcasts, your choices are: 4:3 TV screen 16:9 broadcast Letter Box Displays the entire picture image while fitting the picture to the screen by applying gray bars to the top and bottom of the screen.

  • Page 70: Setting The Clock

    Advanced Operation Setting the clock 1 Press SETUP to display SETUP menu. SETUP menu will appear. • To get the EPG (Electronic Program Guide) and Channel banner, you need to set the CLOCK Remote: correctly. NOTE: The clock function is featured for displaying EPG so there may be 5 minuite-time lag a day at the maximum.
  • Page 71 Advanced Operation 3 Select Daylight Savings Time (DST) 5 Select TIME ZONE using o o / p p using navigation buttons, then navigation buttons, then press ENTER. o o / p p press ENTER. TIME ZONE setting menu will appear. •...
  • Page 72 Advanced Operation INFORMATION on Time Zones 6 Select the desired time zone using o o / navigation buttons, then press p p / s s / B B ENTER. ALASKA: The TIME ZONE will be set, then CLOCK menu • ALASKA will appear.
  • Page 73 Advanced Operation 8 Enter YEAR, DATE, and TIME using 7 Select MANUAL using navigation o o / p p navigation buttons or number buttons, then press ENTER. s s / B B buttons. The current time setting menu will appear. •...
  • Page 74 Advanced Operation 9 Press ENTER when the cursor is on SET. Your settings will be activated. • Activated CLOCK 2002/ 3/31( SUN ) 1 52PM QUIT TIME ZONE CENTRAL CHANNEL MANUAL DISPLAY AUTO CLOCK DETAIL 10 Press SETUP to exit SETUP menu.
  • Page 75 Advanced Operation Adjusting the clock 1 Press SETUP to display SETUP menu. SETUP menu will appear. automatically • STB is capable of adjusting the clock automatically Remote: using the channel clock data included in the signal from digital broadcast sources. In this menu, STB will search for digital channels with clock data, then select a channel to adjust the clock.
  • Page 76 Advanced Operation 3 Select AUTO using navigation 5 Select the desired channel using o o / p p o o / p p buttons, then press ENTER. navigation buttons, then press ENTER. Auto clock setting menu will appear, then STB The selected channel will be set, then the clock of •...

  • Page 77: Setting A New Password

    Advanced Operation Setting a new password 1 Press SETUP to display SETUP menu. SETUP menu will appear. • You will need to change the 4-digit password to protect your V-CHIP/CC setting. Remote: “0000” has been stored as the default password. NOTE: Once the power supply is stopped due to the power failure or the unplugging AC power cord for approx.
  • Page 78 Advanced Operation 3 Select V-CHIP/CC using navigation 4 Enter the default password “0000.” o o / p p “ * ” will appear for each digit. button, then press ENTER. • V-CHIP/CC password window will appear. • V-CHIP / CC V-CHIP / CC QUIT Enter password.
  • Page 79 Advanced Operation 6 Enter a new 4-digit password in the 5 Select NEW PASSWORD using o o / p p upper space, then enter again in the navigation buttons, then press ENTER. lower space to confirm. Password setting menu will appear. •...

  • Page 80: Setting For V-Chip/Cc

    Advanced Operation Setting for V-CHIP/CC V-CHIP/CC In V-CHIP/CC menu, you will make some important settings for the viewing programs you select. First of all, you will need to set your 4-digit password for your V-CHIP setting. Then you can proceed with making your settings. STB incorporates V-CHIP technology to block the viewing of movies and television programs according to their rating categories.
  • Page 81 Advanced Operation 1 Press SETUP to display SETUP menu. 3 Select V-CHIP/CC using navigation o o / p p SETUP menu will appear. • buttons, then press ENTER. V-CHIP/CC password window will appear. • Remote: Screen: V-CHIP / CC SETUP QUIT QUIT Enter password.
  • Page 82 Advanced Operation 4 Enter your 4-digit password. 5 Select V-CHIP/CC using navigation o o / p p buttons, then press ENTER. “ ” will appear for each digit. • V-CHIP/CC setting menu will appear. • V-CHIP / CC V-CHIP / CC QUIT Choose either STB or TV for V-CHIP/CC setting.
  • Page 83 Advanced Operation 6 Select STB or TV using navigation s s / B B buttons, then press ENTER. V-CHIP / CC QUIT V-CHIP / CC CHANNEL MPAA RATING TV RATING DISPLAY CC SELECTION CLOCK NEW PASSWORD DETAIL 7 Press SETUP to exit SETUP menu.

  • Page 84: Setting Mpaa Rating

    Advanced Operation Setting MPAA rating MPAA RATING The MPAA (Motion Picture Association of America) uses the standard movie ratings. Age Label Description Not Rated by MPAA General Audience Parental Guidance Suggested. Some material may not be suitable for children. 2,3,4,5,6 Parents Strongly Cautioned.
  • Page 85 Advanced Operation 1 Press SETUP to display SETUP menu. 3 Select V-CHIP/CC using navigation o o / p p SETUP menu will appear. • buttons, then press ENTER. V-CHIP/CC password window will appear. • Remote: Screen: V-CHIP / CC SETUP QUIT QUIT Enter password.
  • Page 86 Advanced Operation 4 Enter your 4-digit password. 5 Select MPAA RATING using o o / p p navigation buttons, then press ENTER. “ ” will appear for each digit. • MPAA rating setting menu will appear. • V-CHIP / CC Set MPAA rating V-CHIP / CC QUIT...
  • Page 87 Advanced Operation 6 Select PG-13 using navigation 7 Press SETUP to exit SETUP menu. o o / p p buttons, then press ENTER. E.g., when you want to block all PG-13 movies: Lock indicators will be added to programs rated •...

  • Page 88: Setting Tv Rating

    Advanced Operation Setting TV rating TV RATING (TV Parental Guidelines) TV rating allows parents to block out programs they don’t want their children to see. TV rating consists of the age labels and the content labels. The following are the descriptions for each label: Age Label Description Mature Audience Only :...
  • Page 89 Advanced Operation 1 Press SETUP to display SETUP menu. 3 Select V-CHIP/CC using navigation o o / p p SETUP menu will appear. • buttons, then press ENTER. V-CHIP/CC password window will appear. • Remote: Screen: V-CHIP / CC SETUP QUIT QUIT Enter password.
  • Page 90 Advanced Operation 4 Enter your 4-digit password. 5 Select TV RATING using o o / p p “ * ” will appear for each digit. • navigation buttons, then press ENTER. TV rating setting menu will appear. • V-CHIP / CC Set TV rating V-CHIP / CC QUIT...
  • Page 91 Advanced Operation To set age-based ratings: To set content-based ratings: E.g., when you want to block all TV-14 E.g., when you want to block only TV-14 programs programs that contain higher levels of violence 1. Select TV-14 using o p navigation buttons, then press ENTER.

  • Page 92: Selecting Cc Options

    Advanced Operation Selecting CC options 1 Press SETUP to display SETUP menu. SETUP menu will appear. • Remote: CC SELECTION Closed Caption (CC) provides you with on-screen text versions of the audio content for the program being broadcast. In this menu, you are allowed to turn Closed Caption signal On or Off, to set a language for the closed caption and to choose a format for the closed caption.
  • Page 93 Advanced Operation 3 Select V-CHIP/CC using navigation 4 Enter your 4-digit password. o o / p p “ * ” will appear for each digit. buttons, then press ENTER. • V-CHIP/CC password window will appear. • V-CHIP / CC V-CHIP / CC QUIT Enter password.
  • Page 94 Advanced Operation 5 Select CC SELECTION using 7 Press SETUP to exit SETUP menu. o o / p p navigation buttons, then press ENTER. CC options menu will appear. • Use when Closed Caption is not desired. V-CHIP / CC are the primary caption and text services.

  • Page 95: Choosing The Screen Language

    Advanced Operation Choosing the screen language 1 Press SETUP to display SETUP menu. SETUP menu will appear. • MENU LANGUAGE Remote: English, French, and Spanish are available for the screen menu. You can choose the language you prefer. NOTE: ENGLISH has been selected as the default before purchase.
  • Page 96 Advanced Operation 3 Select MENU LANGUAGE using 4 Select the desired language using o o / p p o o / p p navigation buttons, then press ENTER. navigation buttons (E.g., select French), Language menu will appear. then press ENTER. •...

  • Page 97: Appendix And Warranty

    Appendix and Warranty Appendix and Warranty In this section Troubleshooting Specifications Glossary and acronyms Warranty In this section, you will finde some service information and the manufacturer’s warranty for your STB. Before calling our service center, be sure to read items of Troubleshooting.

  • Page 98: Troubleshooting

    Appendix and Warranty Troubleshooting Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
  • Page 99 Appendix and Warranty Symptom Remedy • Make sure that the audio cable is correctly connected. • Make sure that audio devices (stereo, TV, decoder) are turned on. • Make sure that audio devices (stereo, decoder) are correctly set to STB audio output channel.

  • Page 100: Specifications

    Appendix and Warranty Specifications Glossary and Acronyms Product STB for ATSC/NTSC ATSC: ATSC (Advanced Television Systems Committee) is the group that has been working to establish the Connecting Jacks standards for digital television broadcasting and ANT IN digital television equipment - including both SDTV F connector (75 ohm) and HDTV.
  • Page 101 Appendix and Warranty Digital audio (coaxial) output jack: Digital audio (coaxial) output jack send digital audio Standard Definition data to audio devices equipped with a digital audio (coaxial) input jack. SDTV: Standard Definition Television: Dolby® Digital: SDTV signal formats are 480p and 480i. SDTV Dolby®...

  • Page 102: Guía Para Rápida Consulta (Español)

    Guía para rápida consulta Ubicación de los controles PANEL FRONTAL PANEL TRASERO 5 6 7 1 Botón POWER: 1 Toma ANT. IN: Para encender y apagar el STB. Use esta toma para conectar una antena al STB. 2 Indicador POWER: 2 Toma DIGITAL AUDIO (COAXIAL): Se ilumina cuando el STB está...

  • Page 103: Instalación De Las Pilas

    Guía para rápida consulta 4 Botones CH o / p CONTROL REMOTO Presione este botón para cambiar de canal en dirección de ascenso o descenso. 5 Botones de navegación o / p / s / B Presione estos botones para mover el cursor hacia arriba, hacia abajo, hacia la izquierda o hacia la derecha.

  • Page 104: Conexiones De Antena

    Guía para rápida consulta Conexiones de antena Use un cable de antena estándar para conectar la toma mural a la toma ANT IN del STB. Conexión del STB a la antena NOTA: La antena y el cable de antena no vienen incluidos con el producto.

  • Page 105: Conexión Del Stb A Un Sdtv Utilizando La Salida Video

    Guía para rápida consulta Conexión del STB a un SDTV utilizando la salida VIDEO NOTA: El cable de audio y el cable vídeo no vienen incluidos con el producto. Panel trasero del STB Cable de audio Cable de vídeo A las tomas de entrada de audio (L, R) A la toma de entrada de vídeo 1 Use un cable de antena estándar para conectar la toma mural a la toma ANT IN del STB.

  • Page 106: Configuración Inicial

    Guía para rápida consulta Configuración inicial 1 Aparecerá el SETUP WIZARD. ASISTENTE PARA LA CONFIGURACIÓN 2 Seleccione SETUP utilizando los (SETUP WIZARD) botones de navegación y, a s s / B B El SETUP WIZARD es un práctico menú que le continuación, presione ENTER.
  • Page 107 Guía para rápida consulta 8 Introduzca el año (YEAR), fecha (DATE) 11 Presione ENTER. • Aparecerá la pantalla SETUP WIZARD 7/8. y hora (TIME) utilizando los botones de navegación o los botones o o / p p / s s / B B numéricos.
  • Page 108 LIMITED 90 DAY WARRANTY If this (product) experiences any failure due to a defect in material or workmanship within 90 days from the date of purchase, return it to your nearest Sears store, and it will be replaced free of charge.

Table of Contents