Changing Navigation Settings; Navigation - Harman Kardon Guide+Play GPS-500 WE User Manual

Changing Navigation Settings

Touching the N
AVIGATION
button displays the N
S screen (right).
ETTINGS
A : When the
VOIDANCES
GPS-500 calculates navigation
routes, you can set it to always
avoid the following:
• U-turns
• Unpaved roads
• Toll roads
• Roads requiring permits
• Highways
• Border crossings
• Ferries
• Traffic (TMC)
NOTE: The GPS-500 comes from the
factory with the U
avoidance set to ON.
D U
ISTANCE NITS
kilometers/meters, miles/feet or miles/yards. This affects the units shown on
the screen, and the units given during voice navigation prompts.
R P : When the GPS-500 calculates navigation routes, you can set
OUTE RIORITY
it to give priority to either the S
GPS D : This screen displays the following information:
ATA
Your Position Relative
to the Nearest 12
GPS Satellites
Your Current Global Position
(in Latitude and Longitude)
NOTE: Your GPS-500 will lose contact with the GPS satellites whenever you turn its
power off. After turning the power back on, you will need to go outside to receive the
GPS signal again before the navigation functions will operate.
g u d i e
+ l p y a
S
ETTINGS
AVIGATION
R
NPAVED OADS
: You can set the GPS-500's distance units to
HORTEST
GPS-500
™
D or the S
ISTANCE HORTEST
Relative Signal
Strength of Nearest
12 GPS Satellites
T .
IME
Your Current Altitude
(Above/Below Sea Level)
Accuracy of
GPS Satellite Data