Night Mode; Information; Status; Audio Input Signal - Denon AVR-1508 Owner's Manual

Night Mode

Optimized setting for late-night listening.
[Selectable items]
OFF
: Turn night mode off.
LOW
: Low setting.
MID
: Middle setting.
HIGH
: High setting.
Operating from the remote control unit
Press the NIGHT button.
OFF LOW
HIGH

Information

Information can be called out directly by pressing the STATUS button
on the remote control unit.
a Status
s Audio Input Signal
a Status
Shows information about current settings.
MID
Shows information about settings.
The items displayed differ according to the input source.
[Items to be checked]
Surround Mode
Digital Assignment
Select Source Video Select
Audio Delay TONE DEFEAT
etc.
s Audio Input Signal
Shows information about audio input signals.
[Items to be checked]
Surround Mode
: The currently set surround mode is displayed.
SIGNAL
: The input signal type is displayed.
fs
: The input signal's sampling
displayed.
Format
: The number of channels in the input signal (front,
surround, LFE) is displayed.
Offset
: The dialogue normalization correction value is
displayed.
Flag
: "MATRIX" is displayed if the input signal has
undergone matrix processing, "DISCRETE" if the
input signal has undergone discrete processing.
Dialogue normalization function
This is automatically activated when playing Dolby Digital sources.
This function automatically corrects the standard signal level for
individual program sources.
The correction value can be checked using the STATUS button on
the remote control unit.
O f f s e t - 4 d B
The figure is the correction value when the standard level is
corrected.
ENGLISH
frequency is