Advertisement
1. Live View Mode
Live View indicator
(flashing at 0.5sec rate)
After a quick display of welcome page, system will enter the Live View mode. A flashing
red dot appears on the top left hand corner indicating the state in Live View.
(Note:
select correct media type (Refer to P.29) before capturing. By default the setting is at
Negative Film. Unit will reset back to the default setting after power off)
1.1 Mirror (Hard Key)
Save & Exit
Up/Mirror
OK/Capture
Up/Mirror
button
Press Up/Mirror button to turn the image left to right, press again vice versa
●
15
Advertisement
