WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
Environment Protection This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger.
Cleaning the interior ¥ how often the door is opened; ¥ the quantity of food stored; Before using the appliance for the first time, wash ¥ location of appliance. the interior and all internal accessories with luke- warm water and some neutral soap so as to remove A medium setting is generally the most suitable.
HINTS provided. Hints for refrigeration Butter and cheese: these should be placed in Useful hints: special airtight containers or wrapped in aluminium Meat (all types): wrap in polythene bags and place foil or polythene bags to exclude as much air as on the glass shelf above the vegetable drawer.
overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole. Important: Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a maechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer.
INSTALLATION Location The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm (A).
Rear spacers The plastic bag containing all relevant documentation also contains two rear wall spacers to be fitted into special slots on the back of the appliance. Fit the spacers into the slots, taking care to ensure that the arrow (A) is positioned as shown in the figure.
Need help?
Do you have a question about the FE 1240 S/0 and is the answer not in the manual?
Questions and answers